[Oct 27, 2025] Symantec 250-587 Real Exam Questions and Answers FREE
Pass Symantec 250-587 Exam Info and Free Practice Test
NEW QUESTION # 17
Which RAID-levels are the parts of Data Redundancy layout? (Each correct answer presents part of the solution. Select three.)
- A. RAID-5
- B. RAID-0
- C. RAID-1+0
- D. RAID-0+1
- E. RAID-1
Answer: A,D,E
NEW QUESTION # 18
Which two fallback options are available for a 'Network Prevent: Remove HTTP/HTTPS' content response rule when a web-based message contains confidential data? (Select two.)
- A. redirect the content to an alternative destination
- B. remove the content through FlexResponse
- C. allow the content to be posted
- D. block the content from being posted
- E. encrypt the content before posting
Answer: C,D
NEW QUESTION # 19
You have a system that has two disks-disk01 and disk02, which are mapped into the system configuration during boot as disks c0t0d0s2 and c0t1d0s2, respectively. A failure has caused disk01 to become detached. What would you do to view the status of the failed disk01?
- A. Use the vxprint command
- B. Use the vxdg -s list command
- C. Use the vxdisk list command
- D. Use the vxdg list command
Answer: C
NEW QUESTION # 20
A network administrator needs to be notified if someone attempts to tamper with or shut down the VPN connection on an iPad or iPhone. Which product should the administrator use to configure the notification alert?
- A. Mobile Device Management
- B. Mobile Prevent
- C. Network Prevent
- D. Mobile Email Monitor
Answer: A
NEW QUESTION # 21
The datavol volume is in the datadg disk group. A VxFS file system is mounted on the datavol volume. You need to increase the length of a datavol volume because it is not large enough for the amount of data to be stored on it. Which statement is correct for this situation?
- A. You can resize the volume using VEA, but the file system cannot be resized using VEA.
- B. You can use VEA and vxassist command to resize the volume.
- C. You cannot resize a volume by using VE You must use the command line to perform this task.
- D. When you resize the volume using VEA, the file system is also resized by default.
Answer: B
NEW QUESTION # 22
While encapsulating a disk, you discover that a volume is removed as a part of the existing configuration. You want to restore the data on the disk as it was before removal of the disk. As the first step, you recreate the volume using the vxdg make command. What should you do next?
- A. Restore the data on the volume
- B. Start the hot-relocation process
- C. Restore the plexes on the volume
- D. Replace the disk
Answer: A
NEW QUESTION # 23
You are auditing a current storage environment that is utilizing storage tiering. You will use the information gained from the audit in setting up policies for this tiered storage environment. When assigning the policy, you want to take into account applications that run concurrently that compete for I/O resources when data is placed on separate storage devices with separate access paths. Which policy factor should you use for the above scenario?
- A. Expected access patterns
- B. Availability
- C. Business considerations
- D. Load Balancing
Answer: D
NEW QUESTION # 24
How does VxFS allocate storage in the storage array?
- A. By allocating one inode at a time
- B. By allocating random blocks
- C. By allocating groups of extents
- D. By allocating one block at a time
Answer: C
NEW QUESTION # 25
How do you change the time limit for an I/O request in Dynamic Multi-Pathing (DMP) in Veritas Volume Manager on a Solaris operating system?
- A. Modify the /kernel/drv/vxdmp.conf and /kernel/drv/vxio.conf files by adding dmp_failed_io_threshold tunable parameter.
- B. Modify the /kernel/drv/vxio.conf file by adding dmp_failed_io_threshold tunable parameter.
- C. Modify the /kernel/drv/vxdmp.conf file by adding dmp_failed_io_threshold tunable parameter.
- D. Modify the /kernel/drv/vxdmp.conf file by adding vol_maxio tunable parameter.
Answer: C
NEW QUESTION # 26
What is a collection of VxVM disks that share a common configuration and are used to hold the data for a specific application or set of applications?
- A. Plex
- B. Subdisk
- C. Volume
- D. Disk Group
Answer: D
NEW QUESTION # 27
While deporting a disk group under the VxVM control, the disk group fails. What could be the possible reason for the disk group failure?
- A. The database is unmounted.
- B. An access to the disk group is disabled.
- C. The file system is unmounted.
- D. The disk group contains volumes that are in use.
Answer: D
NEW QUESTION # 28
While working with Veritas Storage Foundation for Oracle, you execute the command set #vxtunefs -s -o qui_cache_enable=1 /db01. What will be the output of this command?
- A. It will make the Cached Quick I/O system setting persistent across reboots.
- B. It will determine the current caching state of the file system.
- C. It will create the Cached Quick I/O.
- D. It will enable the Cached Quick I/O.
Answer: D
NEW QUESTION # 29
You are installing the Storage Foundation Management Server 1.0 in Storage Foundation 5.0 Environment. What resource you require before installing?
- A. IP address of the host
- B. Fully Qualified Host Name of the system
- C. Type of File System
- D. Authentication Broker and Management Server not set to same UC/UTC
Answer: B
NEW QUESTION # 30
An incorrectable I/O error has occurred on a RAID volume due to a disk failure that caused the data on the disk to become unavailable. For the RAID volume, the subdisk becomes unavailable and is considered stale and detached. What is the RAID level in the volume in this situation?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 31
You are responsible for administering a large storage environment. The environment includes DBMS systems that use VxFS-based data files, performance-critical application files, and archives of historical user data. Users and application administrators are not satisfied with policies segregating their data files into different file systems in terms of these usages, and they want you to manage these issues for them.
How does DST help in this case? (Select two.)
- A. You can reduce storage costs for all files.
- B. You can simplify the management of file system data.
- C. You can increase access speed for all files.
- D. You can match file access characteristics to performance requirements and cost constraints.
- E. You can distribute the contents of a file system across multiple volumes that may have different configurations.
Answer: D,E
NEW QUESTION # 32
A divisional executive requests a report of all incidents generated by a particular region, summarized by department. What must be populated to generate this report?
- A. sender correlations
- B. remediation attributes
- C. custom attributes
- D. status groups
Answer: D
NEW QUESTION # 33
You are monitoring the Storage Foundation 5.0 environment in your organization. A disk starts receiving intermittent I/O errors and shows signs of hardware fatigue. All the data on the disk is redundant; however, in this situation, you cannot interrupt I/O. How should you resolve this error?
- A. Add a new drive and wait for it to populate.
- B. Move all the subdisks to healthier disks.
- C. Force the subdisks to move to a stripped volume.
- D. Copy the volume to another disk.
Answer: B
NEW QUESTION # 34
You are managing a Storage Foundation 5.0 server and want to capture an image of a file system at a selected instant for use in applications. Which feature will you use to capture the image?
- A. Configure the Veritas Quick I/O option
- B. Veritas Volume Replicator
- C. Veritas FlashSnap Point-in-Time copy
- D. Configure the Veritas Storage Checkpoint option
Answer: C
NEW QUESTION # 35
An administrator needs to remove an agent and its associated events from a specific Endpoint Server. Which Agent Task does the administrator need to perform to disable its visibility in the Enforce UI?
- A. delete action from the Agent Summary page
- B. delete action from the Agent Health dashboard
- C. change Endpoint Server action from the Agent Overview page
- D. disable action from Symantec Management Console
Answer: A
NEW QUESTION # 36
How many free partitions do you need to encapsulate a boot disk?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 37
When working on Storage Foundation 5.0 on HP-UX, you are unable to log in to Veritas Enterprise Administrator. You have converted shadow passwords with long passwords. After converting to shadow password with long password, the users are unable to log into Veritas Enterprise Administrator. You check and ensure that the users are part of the vrtsadm group. Error" V-39- 53247-3 Error while connecting to Server. The user name or password is incorrect. Please retype your user name and password, and try connecting to the server again." You want to ensure all users who are part of the vrtsadm group are able to log on to the Veritas Enterprise Administrator. What should you do?
- A. Retype the username and password.
- B. Apply appropriate patch to Veritas Enterprise Administrator.
- C. Change the Shadow password.
- D. Restart the Volume Manager.
Answer: B
NEW QUESTION # 38
You have installed the Storage Foundation for Sybase. You want to temporarily suspend all write operations to all databases. What should you do?
- A. Use the Concurrent I/O feature.
- B. Use the Quiesce feature.
- C. Use the Cached Quick I/O feature.
- D. Use the Quick I/O feature.
Answer: B
NEW QUESTION # 39
What is the correct configuration for BoxMonitor.Channels that will allow the server to start as a Network Monitor server?
- A. Packet Capture, Network Tap
- B. Packet Capture, Network Monitor
- C. Packet Capture, Copy Rule
- D. Packet Capture, Span Port
Answer: C
NEW QUESTION # 40
You're administering a 10GB volume on a test server that regularly receives new builds that replace most or all of its contents. The build currently under test has an issue that is in the process of being resolved, when a critical production issue arises. Within an hour, the test build you're working with will be overwritten by a copy of the production build, and your working volume under test will be overwritten by a copy of the production build, for its problem resolution. Given that you don't have time to synchronize a snapshot of your test build before it gets overwritten, what technique can you use to get a snapshot of the test volume ready to preserve the state of your test before testing gets set back a week by being overwritten by the production copy?
- A. Use the vxsnap make command with the cachesize=1g option.
- B. Use vxsnap addmir to create a snapshot mirror on the test volume, then use vxsnap make with the nmirror=1 option to convert the mirror into a snapshot volume.
- C. Use vxassist to create an empty volume matching the size of the test volume, then use vxsnap make with the snapvol option and the sync=off option to attach the new volume to the test volume as a snapshot.
- D. Use the vxsnap make command with the plex option to convert an existing plex of the test volume into a snapshot.
Answer: C
NEW QUESTION # 41
You are administering the Storage Foundation 5.0 environment in your organization. Some of the volumes are showing sluggish performance. Tuning the file change using vxtunefs can correct the problem. What are File Change Log tunable parameters for vxtunefs? (Each correct answer presents part of the solution.)(Select two.)
- A. fcl_winterval
- B. fcl_minalloc
- C. fcl_keeptime
- D. clear
- E. set
Answer: A,C
NEW QUESTION # 42
......
Latest 250-587 Exam Dumps Symantec Exam: https://www.vceprep.com/250-587-latest-vce-prep.html
New 2025 Latest Questions 250-587 Dumps - Use Updated Symantec Exam: https://drive.google.com/open?id=15INSWa8GDcMMsNZHG5FeOdXBxgV5f0Ti