300-715 exam questions for practice in 2024 Updated 240 Questions
Updated Jan-2024 Premium 300-715 Exam Engine pdf - Download Free Updated 240 Questions
Cisco 300-715 exam is focused on Implementing and Configuring Cisco Identity Services Engine (ISE). 300-715 exam is designed for those who are interested in obtaining the Cisco Certified Network Professional Security (CCNP Security) certification. 300-715 exam is intended to test the knowledge and skills of the candidates in the areas of managing, configuring, and deploying Cisco ISE solutions.
Cisco 300-715 certification exam is an essential certification for IT professionals who want to demonstrate their skills and knowledge in implementing and configuring Cisco's Identity Services Engine. Implementing and Configuring Cisco Identity Services Engine certification is valuable for professionals who work in network security, network infrastructure, and network operations. By earning this certification, professionals can showcase their proficiency in implementing and managing network infrastructure that incorporates Cisco's Identity Services Engine.
NEW QUESTION # 135
Which two ports must be open between Cisco ISE and the client when you configure posture on Cisco ISE?
(Choose two).
- A. TCP 8443
- B. TCP 443
- C. TCP 8906
- D. TCP 80
- E. TCP 8905
Answer: D,E
NEW QUESTION # 136
An administrator is configuring a new profiling policy in Cisco ISE for a printer type that is missing from the profiler feed The logical profile Printers must be used in the authorization rule and the rule must be hit. What must be done to ensure that this configuration will be successful^
- A. Enable the EndPoints:EndPointPolicy condition in the authorization policy.
- B. Modify the profiler conditions to ensure that it goes into the correct logical profile
- C. Add the new profiling policy to the logical profile Printers.
- D. Create a new logical profile for the new printer policy
Answer: A
NEW QUESTION # 137
During a 802 1X deployment, an engineer must identify failed authentications without causing problems for the connected endpoint. Which command will successfully achieve this''
- A. authentication port-control auto
- B. authentication open
- C. dot1x system-auth-control
- D. dot1x pae authenticator
Answer: B
NEW QUESTION # 138
Which default endpoint identity group does an endpoint that does not match any profile in Cisco ISE become a member of?
- A. endpoint
- B. profiled
- C. blacklist
- D. whitelist
- E. unknown
Answer: E
Explanation:
Section: Profiler
Explanation/Reference: https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_man_identities.html
NEW QUESTION # 139
Which protocol must be allowed for a BYOD device to access the BYOD portal?
- A. HTTPS
- B. SSH
- C. HTTP
- D. SMTP
Answer: A
NEW QUESTION # 140
Drag the Cisco ISE node types from the left onto the appropriate purposes on the right.
Answer:
Explanation:
Explanation
Monitoring = provides advanced monitoring and troubleshooting tools that you can use to effectively manage your network and resources Policy Service = provides network access, posture, guest access, client provisioning, and profiling services.
This persona evaluates the policies and makes all the decisions.
Administration = manages all system-related configuration and configurations that relate to functionality such as authentication, authorization, auditing, and so on pxGrid = shares context-sensitive information from Cisco ISE to subscribers
https://www.cisco.com/c/en/us/td/docs/security/ise/1-4/admin_guide/b_ise_admin_guide_14/b_ise_admin_guide
NEW QUESTION # 141
An engineer deploys Cisco ISE and must configure Active Directory to then use information from Active Directory in an authorization policy. Which two components must be configured, in addition to Active Directory groups, to achieve this goat? (Choose two )
- A. Active Directory External Identity Sources
- B. Library Condition for External Identity. External Groups
- C. LDAP External Identity Sources
- D. Identity Source Sequences
Answer: A,B
Explanation:
E Library Condition for Identity Group: User Identity Group
NEW QUESTION # 142
An adminitrator is migrating device administration access to Cisco ISE from the legacy TACACS+ solution that used only privilege 1 and 15 access levels. The organization requires more granular controls of the privileges and wants to customize access levels 2-5 to correspond with different roles and access needs. Besides defining a new shell profile in Cisco ISE. what must be done to accomplish this configuration?
- A. Define the command privileges for levels 2-5 in the IOS devices
- B. Enable the privilege levels in the IOS devices.
- C. Enable the privilege levels in Cisco ISE
- D. Define the command privileges for levels 2-5 in Cisco ISE
Answer: B
Explanation:
https://learningnetwork.cisco.com/s/blogs/a0D3i000002eeWTEAY/cisco-ios-privilege-levels
NEW QUESTION # 143
Refer to the exhibit:
Which command is typed within the CU of a switch to view the troubleshooting output?
- A. show authentication sessions method
- B. show authentication registrations
- C. show authentication interface gigabitethemet2/0/36
- D. show authentication sessions mac 000e.84af.59af details
Answer: D
NEW QUESTION # 144
Refer to the exhibit. In which scenario does this switch configuration apply?
- A. when passing IP phone authentication
- B. when allowing a hub with multiple clients connected
- C. when allowing multiple IP phones to be connected
- D. when preventing users with hypervisor
Answer: B
Explanation:
https://www.linkedin.com/pulse/mac-authentication-bypass-priyanka-kumari#:~:text=Multi%2Dauthentication%20host%20mode%3A%20You,allows%20multiple%20source%20MAC%20addresses.
NEW QUESTION # 145
What is the purpose of the ip http server command on a switch?
- A. It enables dot1x authentication on the switch.
- B. It enables the switch to redirect users for web authentication.
- C. It enables MAB authentication on the switch
- D. It enables the https server for users for web authentication
Answer: B
NEW QUESTION # 146
Drag the steps to configure a Cisco ISE node as a primary administration node from the left into the correct order on the night.
Answer:
Explanation:
NEW QUESTION # 147
Which two responses from the RADIUS server to NAS are valid during the authentication process? (Choose two )
- A. access-challenge
- B. access-response
- C. access-request
- D. access-accept
- E. access-reserved
Answer: A,E
NEW QUESTION # 148
Refer to the exhibit.
A network engineers configuring the switch to accept downloadable ACLs from a Cisco ISC server Which two commands should be run to complete the configuration? (Choose two)
- A. ip device tracking
- B. radius server vsa sand authentication
- C. radius-server attribute 8 include-in-access-req
- D. aaa authorization auth-proxy default group radius
- E. dot1x system-auth-control
Answer: A,B
NEW QUESTION # 149
In a standalone Cisco ISE deployment, which two personas are configured on a node? (Choose two )
- A. policy service
- B. administration
- C. primary
- D. publisher
- E. subscriber
Answer: A,B
NEW QUESTION # 150
Which command displays all 802 1X/MAB sessions that are active on the switch ports of a Cisco Catalyst switch?
- A. show authentication sessions output
- B. show authentication sessions interface Gi 1/0/x
- C. Show authentication sessions
- D. show authentication sessions interface Gi1/0/x output
Answer: C
NEW QUESTION # 151
Which default endpoint identity group does an endpoint that does not match any profile in Cisco ISE become a member of?
- A. profiled
- B. blacklist
- C. Endpoint
- D. unknown
- E. white list
Answer: D
Explanation:
Reference:
If you do not have a matching profiling policy, you can assign an unknown profiling policy. The endpoint is therefore profiled as Unknown. The endpoint that does not match any profile is grouped within the Unknown identity group. The endpoint profiled to the Unknown profile requires that you create a profile with an attribute or a set of attributes collected for that endpoint.
https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_man_identities.html
NEW QUESTION # 152
An organization wants to implement 802.1X and is debating whether to use PEAP-MSCHAPv2 or PEAP-EAP-TLS for authentication. Drag the characteristics on the left to the corresponding protocol on the right.
Answer:
Explanation:
NEW QUESTION # 153
An administrator is migrating device administration access to Cisco ISE from the legacy TACACS+ solution that used only privilege 1 and 15 access levels. The organization requires more granular controls of the privileges and wants to customize access levels 2-5 to correspond with different roles and access needs. Besides defining a new shell profile in Cisco ISE. what must be done to accomplish this configuration?
- A. Define the command privileges for levels 2-5 in the IOS devices
- B. Enable the privilege levels in the IOS devices.
- C. Enable the privilege levels in Cisco ISE
- D. Define the command privileges for levels 2-5 in Cisco ISE
Answer: B
Explanation:
https://learningnetwork.cisco.com/s/blogs/a0D3i000002eeWTEAY/cisco-ios-privilege-levels
NEW QUESTION # 154
Drag the Cisco ISE node types from the left onto the appropriate purposes on the right.
Answer:
Explanation:
Explanation
Monitoring = provides advanced monitoring and troubleshooting tools that you can use to effectively manage your network and resources Policy Service = provides network access, posture, guest access, client provisioning, and profiling services.
This persona evaluates the policies and makes all the decisions.
Administration = manages all system-related configuration and configurations that relate to functionality such as authentication, authorization, auditing, and so on pxGrid = shares context-sensitive information from Cisco ISE to subscribers
https://www.cisco.com/c/en/us/td/docs/security/ise/1-4/admin_guide/b_ise_admin_guide_14/b_ise_admin_guide
NEW QUESTION # 155
Which two methods should a sponsor select to create bulk guest accounts from the sponsor portal? (Choose two.)
- A. Daily
- B. Monthly
- C. Random
- D. Known
- E. Imported
Answer: C,D
Explanation:
Section: Web Auth and Guest Services
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/ise/1-3/sponsor_guide/ b_spons_SponsorPortalUserGuide_13/b_spons_SponsorPortalUserGuide_13_chapter_01.html
NEW QUESTION # 156
......
Authentic 300-715 Dumps With 100% Passing Rate Practice Tests Dumps: https://www.vceprep.com/300-715-latest-vce-prep.html
Cisco 300-715 Real Exam Questions Guaranteed Updated Dump from VCEPrep: https://drive.google.com/open?id=1pVL3sab-I0rneDtGCnAmftyDqOIZAcu8