[Jan 08, 2022] New 300-625 Exam Dumps with High Passing Rate
Get 300-625 Braindumps & 300-625 Real Exam Questions
300-625 Exam Traits
Before moving any further, knowing the basic exam details is crucial. Cisco 300-625 lasts for 1,5 hour and consists of multiple-choice questions. It is available in the English language and requires applicants to pay a $300 fee as an exam voucher. The test can be attended via either an online or offline proctoring facility. In both cases, the process is controlled entirely by Pearson VUE.
Speaking of passing grades, the vendor hasn’t explained much about this aspect. However, we can tell you that the score you gain remains valid for three consecutive years. To enjoy the benefits beyond that, it is mandatory to meet the recertification requirement as stated by Cisco.
NEW QUESTION 24
Drag and Drop Question
Drag and drop the items from the left onto the correct descriptions on the right. Not all items are used.
Answer:
Explanation:
NEW QUESTION 25
Refer to the exhibit.
The san-user must configure FSPF on the VSAN 500, but fails. An operator with network administrative rights must authorize the san-user to perform this work. Which configuration must the operator apply?
- A. MDS-A(config)# role name sangroup
MDS-A(config-role)# rule 4 permit config feature fspf - B. MDS-A(config)# role name sangroup
MDS-A(config-role)# rule 2 permit config feature vsan - C. MDS-A(config)# role name sangroup
MDS-A(config-role)# no rule 2 - D. MDS-A(config)# role name sangroup
MDS-A(config-role)# vsan policy deny
MDS-A(config-role-vsan)# permit vsan 500
Answer: D
NEW QUESTION 26
Which two protocols are used to implement SAN telemetry on Cisco MDS switches? (Choose two.)
- A. gRPC transport
- B. RPC transport
- C. GPB transport
- D. gRPC encoding
- E. GPB encoding
Answer: A,E
NEW QUESTION 27
Two stable fabrics have overlapping domains. After a switch from the first domain is joined to a switch from the second domain, both switches become isolated.
What caused the problem?
- A. The rcf-reject option is enabled on the interfaces.
- B. The autoreconfigure option is enabled on both switches.
- C. The rcf-reject option is disabled on the interfaces.
- D. The autoreconfigure option is disabled on both switches.
Answer: D
NEW QUESTION 28
Refer to the exhibit.
Which configuration change improves the ability of the link to recover from frame loss?
- A. Disable PMTU discovery.
- B. Increase the send buffer size to 15000 KB.
- C. Increase the reset timeout.
- D. Enable selective acknowledgment.
Answer: D
Explanation:
Section: Implementation
Explanation
NEW QUESTION 29
Refer to the exhibit. The san-user must configure FSPF on the VSAN 500, but fails. An operator with network administrative rights must authorize the san-user to perform this work.
Which configuration must the operator apply?
- A. MDS-A(config)# role name sangroup
MDS-A(config-role)# rule 4 permit config feature fspf - B. MDS-A(config)# role name sangroup
MDS-A(config-role)# rule 2 permit config feature vsan - C. MDS-A(config)# role name sangroup
MDS-A(config-role)# no rule 2 - D. MDS-A(config)# role name sangroup
MDS-A(config-role)# vsan policy deny
MDS-A(config-role-vsan)# permit vsan 500
Answer: D
NEW QUESTION 30
Which tool was used to manage Cisco Storage networking before Cisco DCNM?
- A. Cisco Adaptive Security Device Manager
- B. Cisco Fabric Manager
- C. Cisco UCS Director
- D. Cisco UCS Manager
Answer: B
NEW QUESTION 31
Refer to the exhibit.
Refer to the exhibit. An engineer is configuring Inter-VSAN routing for two Cisco MDS switches. The FSPF cost between the switches is 500, and the Cisco MDS core virtuahzes an IVR NAT domain as shown. Which statement about the topology is correct?
- A. The MDS-Core simulates an IVR NAT and decreases the cost to 400.
- B. The MDS-Core simulates an IVR NAT. and the FSPF cost is 500.
- C. The MDS-Core simulates an IVR NAT and increases the cost to 501.
- D. The MDS-Core simulates an IVR NAT and increases the cost to 600.
Answer: B
NEW QUESTION 32
Which result occurs when a VSAN is deleted that contains non-trunking ports?
- A. The ports are moved to VSAN 4094.
- B. The ports are moved to VSAN 1.
- C. The port configurations are cleared.
- D. The ports are removed from the configuration.
Answer: A
NEW QUESTION 33
Refer to the exhibit.
Refer to the exhibit. What is the result of the configuration?
- A. No-drop CoS values are advertised by the DCBX.
- B. PFC fails to operate properly unless LFC is disabled on Ethernet 1/10.
- C. PFC operates on Ethernet 1/10 regardless of the capability of the peer.
- D. LFC is prioritized over PFC on Ethernet 1/10.
Answer: A
NEW QUESTION 34
Which configuration is always required when running the setup utility on a Cisco MDS 9000 Series Switch?
- A. administrator password
- B. management IP address
- C. active NTP server
- D. active default gateway
Answer: A
Explanation:
Section: Implementation
NEW QUESTION 35
Refer to the exhibit. Device alias information must be merged for two fabrics.
Which setting must match on both fabrics before the merge can be performed successfully?
- A. smart-zoning
- B. qos
- C. session
- D. device-alias mode
Answer: D
NEW QUESTION 36
Refer to the exhibit.
Which configuration change improves the ability of the link to recover from frame loss?
- A. Disable PMTU discovery.
- B. Increase the send buffer size to 15000 KB.
- C. Increase the reset timeout.
- D. Enable selective acknowledgment.
Answer: D
NEW QUESTION 37
Refer to the exhibit.
Refer to the exhibit. A user who is logged in as an operator cannot update the zoneset. What is the cause of this issue?
- A. The fabric is locked by admin on another switch
- B. The fabric is locked by admin on switch-2
- C. The switch has a conflicting domain ID
- D. Merge control is disabled
- E. Hard zoning is enabled
Answer: A,C
NEW QUESTION 38
Refer to the exhibit.
A network engineer must configure the SAN telemetry streaming feature to stream statistics form a Cisco MDS 9000 Series Switch to two external receivers with the IP addresses 192.168.1.4 and 192.168.1.5. Which two configurations accomplish this configuration? (Choose two.)
- A. Add IP address 192.168.1.5 port 50005 protocol gRPC encoding GPB under destination-group 300.
- B. Add dst-grp 300 under subscription 200.
- C. Add dst-grp 100 under subscription 200.
- D. Add dst-grp 200 under subscription 100.
- E. Add IP address 192.168.1.5 port 50005 protocol gRPC encoding GPB under destination-group 100.
Answer: D,E
NEW QUESTION 39
A network engineer is configuring a Cisco MDS switch for FCoE. Which two conditions must be considered during the implementation phase? (Choose two.)
- A. FCoE is already enabled on a Cisco MDS switch.
- B. The QoS policy must be identical to other Cisco FCoE switches in the network.
- C. VLAN 1 or the native VLAN can be mapped to an FCoE VSAN.
- D. On the Cisco MDS, the MTU is set equal to 2112.
- E. On Cisco MDS switches, system-defined class maps for class-FCoE and class-default are enabled but can be deleted.
Answer: A,B
Explanation:
Section: Implementation
NEW QUESTION 40
Which two components are required for successful MDS USB POAP (Choose two.)
- A. system and kickstart images
- B. script named poap_script pl
- C. NTFS formatted USB drive
- D. USB drive in port 1
- E. ENTERPRISE_PKG license
Answer: A,B
NEW QUESTION 41
A storage administrator wants to enable NPV in a Fibre Channel edge switch. Which configuration is supported in this mode?
- A. Dynamic Port VSAN Membership
- B. E Port connectivity to the core switch
- C. local switching of east-west traffic
- D. Cisco Fabric Services distribution over Fibre Channel
Answer: D
NEW QUESTION 42
Which condition requires using a device alias rather than a Fibre Channel alias?
- A. The same alias must be used in zoning as well as DPVM
- B. All aliases being used are being configured in the same VSAN
- C. Aliases must be saved within a central database on the fabric
- D. The zone database must be distributed over the fabric
Answer: A
NEW QUESTION 43
Which EtherType is used by the FCoE Initialization Protocol?
- A. 0×8913
- B. 0×8914
- C. 0×xfc0e
- D. 0×8906
Answer: B
Explanation:
Section: Implementation
NEW QUESTION 44
A storage network engineer must configure a 48-port Cisco MDS switch to reject any login requests to VSAN
10 from unauthorized Fibre Channel devices and switches. All the devices that were already logged in to the switch from this VSAN must be allowed without any manual configuration. Which configuration must be applied?
- A. switch(config)# feature port-security
switch(config)# port-security activate vsan 10 no auto-learn - B. switch(config)# port-security activate vsan 10
- C. switch(config)# feature port-security
switch(config)# port-security activate vsan 10 - D. switch(config)# feature port-security
switch(config)# port-security database vsan 10
switch(config-port-security)# any-wwn interface fc1/1 - fc1/48
Answer: B
Explanation:
Section: Management and Monitoring
NEW QUESTION 45
A storage network engineer must configure a 48-port Cisco MDS switch to reject any login requests to VSAN 10 from unauthorized Fibre Channel devices and switches. All the devices that were already logged in to the switch from this VSAN must be allowed without any manual configuration. Which configuration must be applied?
- A. switch(config)# feature port-security
switch(config)# port-security activate vsan 10 no auto-learn - B. switch(config)# port-security activate vsan 10
- C. switch(config)# feature port-security
switch(config)# port-security activate vsan 10 - D. switch(config)# feature port-security
switch(config)# port-security database vsan 10
switch(config-port-security)# any-wwn interface fc1/1 - fc1/48
Answer: B
NEW QUESTION 46
......
300-625 Dumps To Pass Cisco Exam in 24 Hours - VCEPrep: https://www.vceprep.com/300-625-latest-vce-prep.html