[Jul-2024] Verified 301a dumps Q&As - 301a dumps with Correct Answers
The Best LTM Specialist Study Guide for the 301a Exam
NEW QUESTION # 64
An LTM Specialist needs to configure a setup for antivirus scanning of HTTP traffic with an internet Contact adaption Protocol (ICAP) server.
Which two server type should be used? (Choose two.)
- A. Performance HTTP
- B. Forwarding IP
- C. Stateless
- D. Standard
- E. Internal
Answer: D,E
NEW QUESTION # 65
Refer to the exhibit.
A pool is contoured with four members. A user has a current connection established with 10.18.1.40. The virtual server has a persistence Profile configured.
- A. 10.18.1.30
- B. 10.18.1.40
- C. 10.18.1.20
- D. 10.18.1.10
Answer: B
NEW QUESTION # 66
An LTM device needs to be configured a virtual server. The application requires SSL encryption from the client to the server and an X-Forwarded-For added by the LTM device.
Which virtual server type should the LTM Specialist use?
- A. Forwarding (IP)
- B. Performance
- C. Performance (HTTP)
- D. Stateless
- E. Standard
Answer: E
NEW QUESTION # 67
A BIG IP system load balances connections to a web application. A TCP-based Denial of Service attack against the web application is occurring, which has caused very high memory utilization on the LTM device due to stale TCP connections.
Which TCP profile option should be used to reduce memory utilization?
- A. Idle timeout
- B. Slow Start
- C. Multipath TCP
- D. Reset on timeout
Answer: A
NEW QUESTION # 68
An LTM Specialist needs to use a set of addresses to access an Internet website in an outbound configuration.
Which feature should the LTM Specialist configure?
- A. SNAT address
- B. SNAT pool
- C. NAT address
- D. NAT pool
Answer: B
NEW QUESTION # 69
An LTM Specialist is configuring a virtual server with an IP address.
Which configuration is unsupported?
- A. Performance 14 virtual server with a FastHTTP profile
- B. Standard virtual server with an HTTP profile
- C. Performance 14 virtual server with an HTTP profile
- D. Standard virtual server with a TCP profile
Answer: C
NEW QUESTION # 70
Remote office users are having performance issues with a virtual hosted on the F5 LTM. The LTM Specialist reviews the configuration for the virtual server and determine that some settings are set with default profiles.
Which profile should the LTM Specialist enable to improve virtual server performance?
- A. A Stream profile for the remote user networks
- B. A FastL4 profile on the virtual server
- C. An HTTP profile for the virtual server
- D. A WAN optimized client side profile
Answer: D
Explanation:
They key word is that there are performance problem with Remote office users, no F5. The user experience can be improved through tcp optimization. The expression should be wom-tcp-wan-optimized in Protocol Profile (Client)
NEW QUESTION # 71
Which process can be eliminated by terminating SSL communication on the LTM device rather than the backend pool members?
- A. obtaining SSL certificates from a certificate authority
- B. applying security patches on the backend pool members
- C. generating CSRS
- D. administering SSL on the web servers
Answer: D
NEW QUESTION # 72
Exhibit.
The LTM devices LTM1 and LTM2 are configured in a Device Group (Sync Failover) with Network Failover configured on both the management and HA and Internal VLANS. and ConfigSync is confined in a Device Group (Sync Failover) with Network Failover and internal are tagged on a single trunk with subnets Connection Mirroring is configured on both the HA interlace directly connected between LTM1 and LTM2, and the management interlace is connected to a management switch. The LTM devices have four Traffic Groups defined, and both LTM devices are healthy and capable of passing traffic for any of the Traffic Groups.
An LTM Specialist disconnects the cable for the HA network in an effort to test failover.
Which HA functionality works in this case?
- A. ConfigSync does NOT work. Connection Mirroring floes NOT work.
- B. ConfigSync does NOT work; Connection Mirroring works
- C. ConfigSync works. Connection Mirroring docs NOT work
- D. ConfigSync works Connection Mirroring works
Answer: B
NEW QUESTION # 73
What should an LTM Specialist configure on an LTM device to send AVR notification emails?
- A. Email notification to be sent via iControl from the LTM device
- B. Custom SNMP traps on the LTM device for AVR notifications
- C. Email notification to be sent via SMTP from the LTM device
- D. Syslog on the LTM device to send to an SMTP server
Answer: C
NEW QUESTION # 74
In an iApp, which configuration protects against accidental changes to an application Services configuration?
- A. Template
- B. Name
- C. Components
- D. Strict Updates
Answer: D
NEW QUESTION # 75
Exhibit.
The server team has recently configured the three new DNS servers shown for the data center. No current DNS servers are currently configured on the LTM device.
Which command should be used to configure the LTM device to use the new DNS servers?
- A. tmsh set/sysdns name-servers add {192.168.2.192.168.100.100.192.168.200.200}
- B. tmsh change /sysdns name-servers add {192.168.1.2.192.168.100.100.192.168.200.200}
- C. tmsh modify/sysdns name-servers add {192.168.1.2.192.168.100.100.192.168.200.200}
- D. tmsh create/systins name-servers add {192 168.1.2.192.168.100.1O0.192.168.2O0.2OO}
Answer: C
Explanation:
Modify the configuration with modify, and create the configuration with create. Excluding B and D, and the question is to modify the DNS pointer of E5 itself the need to use is modify.
NEW QUESTION # 76
An LTM device configuration is as shown:
An LTM device configuration is as shown
What should be the two expected outcomes based on this configuration? (Choose two.)
- A. A client session that has been idle for 48 minutes will be sent to the same pool members
- B. A client session that has been idle for 14 minutes will be balanced to a new pool member
- C. A client session that has been idle for 16 minutes will be sent to the same pool member
- D. A client session that has been idle for 12 minutes will be sent to the same pool member
- E. A client session that has been idle for 20 minutes will be balanced to a new pool member
Answer: D,E
NEW QUESTION # 77
Traffic to a pool of SFTP servers that share storage must be balanced by an LTM device.
What are the required profile and persistence settings for a standard virtual server?
- A. tcp, ctientsst, ftp serverssl persistence
- B. tcp - no persistence profile will be used
- C. tcp, clientssl, serverssl persistence
- D. tcp, ftp - Source address persistence
Answer: D
NEW QUESTION # 78
TWO BIG-IP appliances need to be configured to load balance multiple firewall in a firewall sandwich, Which health monitor setting should be used to verify that the firewalls are able to forward traffic?
- A. Adaptive
- B. Transparent
- C. Reverse
- D. Up internal
Answer: B
Explanation:
Sandwich architect firewalls are generally deployed transparently. You can enable Transparent to point to the next-hop address of the firewall and associate it with the firewall pool member for detection.
NEW QUESTION # 79
......
Exam Topics of F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam
The following will be discussed in this section:
Determine use cases for forcing down a member
Given a situation where a pool member has been disabled but still appears to be receiving traffic, determine the cause
Explain how to create a user U/A
Discuss scenarios in which restoring a UCS archive is appropriate
Given a situation where a virtual server configuration change did not appear to immediately take effect, determine why
Given a proposed virtual server configuration change, outline the scope of the change and for which connections those changes will affect (active connections, new connections, persisted sessions)
Identify which high-level tasks can be automated using BIG-IQ
Create and restore a UCS archive under the appropriate circumstances
Explain how to modify user properties
Determine use cases for disabling a member
Distinguish between disabling a member and forcing it down
Given a description of an application, identify the correct virtual server configured for it (HTTP/HTTPS, TCP/UDP, VLANsenabled, route-domain)
Recognize when a packet capture is needed within the context of a performance issue
Manage software images
Articulate the characteristics of a pool member that has been disabled or forced offline (Such as for new connections, persisted connections, etc.)
Understand the processes of licensing, license reactivation, and license modification (add-ons)
Given an HA pair, describe the appropriate strategy for deploying a new software image
Establish the frequency of a given issue (random, continuous, isolated, intermittent, repetitive intervals)
Discuss the tasks involved in successfully restoring a UCS archive
Given a scenario, discuss when it is appropriate to create a UCS archive
Identify which modules are licensed and/or provisioned U/A
Differentiate between performance issue types (i.e. Latency, Congestion, broken content)
301a certification guide Q&A from Training Expert VCEPrep: https://www.vceprep.com/301a-latest-vce-prep.html
301a Certification Overview Latest 301a PDF Dumps: https://drive.google.com/open?id=1Ph_ly3uBwG4x7OF8N0UNRxJEZVEQJMkA