Nov-2024 EMC D-PSC-MN-01 Certification Real 2024 Mock Exam
D-PSC-MN-01 Exam Questions and Valid PMP Dumps PDF
NEW QUESTION # 51
A platform engineer plans to set up a rack system for a Dell PowerScale cluster installation.
What is a requirement for the initial setup?
- A. The rack system must have twelve independent 200-240 V power sources.
- B. Grounding lugs must be used for internal grounding within the chassis.
- C. The rack cabinet must have at least dual power supplies with power distribution.
- D. Power cords must be connected to four power distribution units within the rack cabinet.
Answer: C
NEW QUESTION # 52
What are key considerations when installing a rack for PowerScale nodes?
- A. Proximity to other heat-generating equipment
- B. All of the above
- C. Rack's alignment and leveling
- D. Accessibility for maintenance
Answer: B
NEW QUESTION # 53
Which tools or methods are critical for ensuring compliance and integrating SRS within a PowerScale cluster configuration? (Select two)
- A. SyncIQ for data replication
- B. SRS for remote support
- C. Security and Compliance Suite
- D. InsightIQ for performance monitoring
Answer: B,C
NEW QUESTION # 54
Which tools are used for managing a PowerScale cluster? (Select two)
- A. PAPI
- B. SNMP Manager
- C. WebUI
- D. CLI
Answer: C,D
NEW QUESTION # 55
What actions are required to prepare the installation site regarding power requirements? (Select two)
- A. Installing backup power solutions, such as UPS
- B. Confirming the electrical outlets meet the necessary power specifications
- C. Ensuring proper grounding is available
- D. Providing dedicated circuits for each node
Answer: B,C
NEW QUESTION # 56
Which statement is accurate regarding Dell PowerScale firmware updates?
- A. Firmware updates require a serial connection to the node.
- B. Drive firmware updates require a reboot.
- C. Update can only be applied to a node in maintenance mode.
- D. Node firmware updates require a reboot.
Answer: D
NEW QUESTION # 57
A platform engineer plans to upgrade Dell PowerScale OneFS.
Which action must they consider during the pre-upgrade phase?
- A. Implement OneFS API
- B. Check supportability and compatibility requirements
- C. Install recommended patches
- D. Update firmware
Answer: D
NEW QUESTION # 58
What phase is crucial in the initial setup of a PowerScale cluster to ensure successful installation and deployment?
- A. Configuring data protection levels
- B. Assessing network infrastructure
- C. Validating hardware and software compatibility
- D. Implementing cluster management tools
Answer: C
NEW QUESTION # 59
Before a PowerScale node can be put into operation after maintenance, what is an essential task?
- A. Performing a full system backup
- B. Running a system health check
- C. Restoring user data
- D. Updating the node's firmware
Answer: B
NEW QUESTION # 60
In the context of PowerScale, what is the significance of monitoring FRU status?
- A. To preemptively identify potential hardware failures
- B. To maintain hardware inventory accuracy
- C. To track software version compatibility
- D. To plan for capacity expansion
Answer: A
NEW QUESTION # 61
What is the recommended action if a PowerScale node reports inconsistent data?
- A. Run a synchronization process with other nodes
- B. Remove the node from the cluster and replace it
- C. Reboot the node to clear any temporary issues
- D. Isolate the node immediately and perform a data integrity scan
Answer: D
NEW QUESTION # 62
What is a fundamental step in creating a new PowerScale cluster?
- A. Selecting a cluster name and assigning it an IP range
- B. Installing anti-virus software on all nodes
- C. Configuring email alerts for system warnings
- D. Subscribing to a support plan for hardware replacement
Answer: A
NEW QUESTION # 63
What is a precaution when working with Dell PowerScale equipment?
- A. Nodes can operate below 5 degrees C, but only for limited periods of time
- B. Connections to the branch circuit need not be properly grounded
- C. The total rack load should not exceed 70% of the branch circuit rating
- D. Use side stabilizers if the rack is not bolted to the floor
Answer: A
NEW QUESTION # 64
What is a key step when connecting nodes to the data center's power supply during a PowerScale installation?
- A. Using power cables of the shortest possible length to reduce resistance
- B. Ensuring each node is connected to a different circuit breaker
- C. Implementing power redundancy for each node
- D. Labeling power cables according to the nodes they supply
Answer: C
NEW QUESTION # 65
What connectivity tests performed after the initial configuration of a Dell PowerScale cluster?
- A. SSH, PuTTy, ping, and HTTP
- B. WebUI, HTTPS, DNS, and Client
- C. WinSCP, DNS, ping, and SSH
- D. Client, NFS, ping, and WinSCP
Answer: B
NEW QUESTION # 66
What is the primary purpose of maintaining Customer Replaceable Units (CRUs) in a PowerScale environment?
- A. To enhance the node's storage capacity
- B. To ensure high availability and reliability
- C. To upgrade the system's performance
- D. To comply with software licensing requirements
Answer: B
NEW QUESTION # 67
During the maintenance of PowerScale nodes, what is a Field Replaceable Unit (FRU)?
- A. A component that can be replaced without sending the entire unit for repair
- B. An external device that enhances the node's capabilities
- C. A software module that can be updated independently
- D. A node that can be swapped with another in the cluster without downtime
Answer: A
NEW QUESTION # 68
A customer has purchased a new Dell PowerScale cluster consisting of eight F600 nodes and four H5600 nodes.
What is required when installing these nodes?
- A. An additional 1U of space for cable management
- B. At least one standard 40U-P rack
- C. Deep rack for the H5600 chassis
- D. Step-up transformers for the H5600 nodes
Answer: C
NEW QUESTION # 69
When cabling nodes, what practices should be followed to ensure a successful PowerScale installation? (Select two)
- A. Using cables of standardized lengths to reduce clutter
- B. Labeling each cable according to its connection points
- C. Testing each cable for connectivity and signal integrity
- D. Implementing structured cabling that adheres to industry standards
Answer: B,C
NEW QUESTION # 70
Which aspect is crucial when cabling nodes in a PowerScale installation?
- A. Verifying cable integrity with testing tools
- B. Documenting the cabling layout
- C. Ensuring cables are of the minimum required length
- D. Using color-coded cables for easy identification
Answer: B
NEW QUESTION # 71
Which Dell PowerScale interface is the simplest to use for customers?
- A. Web administration interface
- B. OneFS command line
- C. Serial console
- D. Platform application interface
Answer: A
NEW QUESTION # 72
Which Dell online service platform is used to access trusted, best-practice, guided instructions for common service tasks such as product installations, upgrades, and troubleshooting?
- A. TechDirect
- B. MyService360
- C. SolVe
- D. SupportAssist
Answer: C
NEW QUESTION # 73
When joining a new node to a cluster, why is reformatting or reimaging often required?
- A. To update the node's firmware to the latest version
- B. To ensure the node's OS is compatible with the cluster
- C. To remove any residual data from previous deployments
- D. To configure the node with the cluster-specific settings
Answer: C
NEW QUESTION # 74
......
D-PSC-MN-01 Question Bank: Free PDF Download Recently Updated Questions: https://www.vceprep.com/D-PSC-MN-01-latest-vce-prep.html
D-PSC-MN-01 Brain Dump: A Study Guide with Tips & Tricks for passing Exam: https://drive.google.com/open?id=1on1hu6vAcgqY-TjoZ8GTiC7wC_Q06DgW