[Oct 28, 2024] C-ABAPD-2309 certification guide Q&A from Training Expert VCEPrep
C-ABAPD-2309 Certification Overview Latest C-ABAPD-2309 PDF Dumps
NEW QUESTION # 15 
Which of the following ON conditions must you insert in place of "???"?
- A. ON Sprojection.carrier_id=Z_Source2.carrier_id
- B. ON Sprojection. Carrier Source2.carrier
- C. ON Sprojection Camer=Source2 carrier_id
- D. ON Z_Sourcel.camer_id = 7_Source2 carrier_id
Answer: A
Explanation:
Explanation
The correct ON condition that must be inserted in place of "???" is:
ON Sprojection.carrier_id=Z_Source2.carrier_id
This ON condition specifies the join condition between the CDS view Sprojection and the database table Z_Source2. The join condition is based on the field carrier_id, which is the primary key of both the CDS view and the database table. The ON condition ensures that only the records that have the same value for the carrier_id field are joined together1.
The other options are not valid ON conditions, because:
A: ON Z_Sourcel.camer_id = 7_Source2 carrier_id is not valid because Z_Sourcel and 7_Source2 are not valid data sources in the given code. There is no CDS view or database table named Z_Sourcel or
7_Source2. The correct names are Z_Source1 and Z_Source2. Moreover, the field camer_id is not a valid field in the given code. There is no field named camer_id in any of the data sources. The correct name is carrier_id.
B: ON Sprojection Camer=Source2 carrier_id is not valid because Sprojection and Source2 are not valid data sources in the given code. There is no CDS view or database table named Sprojection or Source2.
The correct names are Sprojection and Z_Source2. Moreover, the field Camer is not a valid field in the given code. There is no field named Camer in any of the data sources. The correct name is carrier_id. Furthermore, the ON condition is missing the dot (.) operator between the data source name and the field name, which is required to access the fields of the data source1.
C: ON Sprojection. Carrier Source2.carrier is not valid because Carrier and carrier are not valid fields in the given code. There is no field named Carrier or carrier in any of the data sources. The correct name is carrier_id. Moreover, the ON condition is missing the dot (.) operator between the data source name and the field name, which is required to access the fields of the data source1.
References: 1: ON Condition - ABAP Keyword Documentation
NEW QUESTION # 16
In this nested join below in which way is the join evaluated?
- A. From the left to the right in the order of the tables:
1.
a is joined with b
2.
b is joined with c - B. From the bottom to the top in the order of the on conditions:
1.
a is joined with b
2.
b is joined with c - C. From the right to the left in the order of the tables:
1.
b is joined with c.
2.
b is joined with a. - D. From the top to the bottom in the order of the on conditions
1.
b is joined with c
2.
a is joined with b
Answer: D
Explanation:
Explanation
The nested join is evaluated from the top to the bottom in the order of the ON conditions. This means that the join expression is formed by assigning each ON condition to the directly preceding JOIN from left to right.
The join expression can be parenthesized implicitly or explicitly to show the order of evaluation. In this case, the implicit parentheses are as follows:
SELECT * FROM (a INNER JOIN (b INNER JOIN c ON b~c = c~c) ON a~b = b~b) This means that the first join expression is b INNER JOIN c ON b~c = c~c, which joins the columns of tables b and c based on the condition that b~c equals c~c. The second join expression is a INNER JOIN (b INNER JOIN c ON b~c = c~c) ON a~b = b~b, which joins the columns of table a and the result of the first join expression based on the condition that a~b equals b~b. The final result set contains all combinations of rows from tables a, b, and c that satisfy both join conditions.
References: 1: SELECT, FROM JOIN - ABAP Keyword Documentation - SAP Online Help
NEW QUESTION # 17
In the assignment, data (gv_result) = 1/8. what will be the data type of gv_result?
- A. TYPE P DECIMALS 2
- B. TYPE DEFLOAT 16
- C. TYPE P DECIMALS 3
- D. OTYPE I
Answer: B
Explanation:
Explanation
The data type of gv_result in the assignment data (gv_result) = 1/8 will be TYPE DECFLOAT 16. This is because the assignment operator (=) in ABAP performs an implicit type conversion from the source type to the target type, according to the following rules12:
If the target type is specified explicitly, the source value is converted to the target type.
If the target type is not specified explicitly, the source type is used as the target type, unless the source type is a literal or an expression, in which case the target type is determined by the following priority order: DECFLOAT34, DECFLOAT16, P, F, I, C, N, X, STRING, XSTRING.
In this case, the target type is not specified explicitly, and the source type is an expression (1/8). Therefore, the target type is determined by the priority order, and the first matching type is DECFLOAT16, which is a decimal floating point type with 16 digits of precision12.
References: 1: ABAP Assignment Rules - ABAP Keyword Documentation - SAP Online Help 2: ABAP Data Types - ABAP Keyword Documentation - SAP Online Help
NEW QUESTION # 18
Which function call returns 0?
- A. find_any_not_of( val 'ABAP ABAP abap' sub = 'AB')
- B. Count (val - 'ABAP ABAP abap' sub - 'AB' )
- C. Count_any_of ( val - 'ABAP ABAP abap' sub "AB" )
- D. find_any_of (val = "ABAP ABAP abap' sub = "AB")
Answer: A
Explanation:
Explanation
The function find_any_not_of returns the position of the first character in the string val that is not contained in the string sub. If no such character is found, the function returns 0. In this case, the string val contains only the characters A, B, and a, which are all contained in the string sub, so the function returns 0. The other functions return positive values, as follows:
Count_any_of returns the number of occurrences of any character in the string sub within the string val.
In this case, it returns 8, since there are 8 A's and B's in val.
Count returns the number of occurrences of the string sub within the string val. In this case, it returns 2, since there are 2 AB's in val.
find_any_of returns the position of the first character in the string val that is contained in the string sub.
In this case, it returns 1, since the first character A is in sub. References: String Functions - ABAP Keyword Documentation, Examples of String Functions - ABAP Keyword Documentation
NEW QUESTION # 19
Image:
In the following ABAP SQL code, what are valid case distinctions? Note: There are 2 correct answers to this question.
A)
B)
C)
D)
- A. Option C
- B. Option B
- C. Option A
- D. Option D
Answer: B,C
NEW QUESTION # 20
Which of the following ABAP SQL statements are valid? Note: There are 2 correct answers to this question.
- A. SELECT FROM /dmo/connection FIELDS carrid O airpfrom,
MAX(distance) AS dist_max, MIN( distance) AS dist_min GROUP BY carrid, airpfrom INTO TABLE @DATA(It_hits) - B. SELECT FROM /dmo/connection FIELDS \/ O carrid, airpfrom,
MAX( distance) AS dist_max, MIN(distance) AS dist_min INTO TABLE @DATA(It_hits) - C. SELECT FROM /dmo/connection FIELDS r-i carrid, airpfrom u GROUP BY carrid, connid INTO TABLE @DATA(It_hits).
- D. SELECT FROM /dmo/connection FIELDS V D MAX(distance) AS dist_max
MIN(distance) AS dist_min INTO TABLE @DATA(It_hits).
Answer: A,B
Explanation:
The following are the explanations for each ABAP SQL statement:
A: This statement is valid. It selects the fields carrid, airpfrom, and the aggregate functions MAX(distance) and MIN(distance) from the table /dmo/connection, and groups the results by carrid and airpfrom. The aggregate functions are aliased as dist_max and dist_min. The results are stored in an internal table named It_hits, which is created using the inline declaration operator @DATA.
B: This statement is valid. It is similar to statement A, except that it does not specify the GROUP BY clause. This means that the aggregate functions are applied to the entire table, and the results are stored in an internal table named It_hits, which is created using the inline declaration operator @DATA.
C: This statement is invalid. It selects the aggregate functions MAX(distance) and MIN(distance) from the table /dmo/connection, but it does not specify any grouping or non-aggregate fields. This is not allowed in ABAP SQL, as the SELECT list must contain at least one non-aggregate field or a GROUP BY clause. The statement will cause a syntax error.
D: This statement is invalid. It selects the fields carrid and airpfrom from the table /dmo/connection, and groups the results by carrid and connid. However, the field connid is not included in the SELECT list, which is not allowed in ABAP SQL, as the GROUP BY clause must contain only fields that are also in the SELECT list. The statement will cause a syntax error.
NEW QUESTION # 21
What are valid statements? Note: There are 2 correct answers to this question.
- A. The pseudo-comment is checked by the syntax checker
- B. ##NEEDED is checked by the syntax checker.
- C. #EC_NEEDED is not checked by the syntax checker.
- D. The pragma is not checked by the syntax checker.
Answer: B,D
Explanation:
Both statements are valid in ABAP, but they have different effects on the program.
* ##NEEDED is a pragma that can be used to hide warnings from the ABAP compiler syntax check. It tells the check tools that a variable or a parameter is needed for further processing, even if it is not used in the current statement. For example, if you declare a variable without assigning any value to it, you can use ##NEEDED to suppress the warning about unused variables12.
* The pragma is not checked by the syntax checker means that you can use any pragma to hide any warning from the ABAP compiler syntax check, regardless of its effect on the program logic or performance. For example, if you use ##SHADOW to hide a warning about an obscured function, you can also use it to hide a warning about an invalid character in a string12.
You cannot do any of the following:
* #EC_NEEDED is not checked by the syntax checker: This is not a valid statement in ABAP. There is no pseudo-comment with #EC_NEEDED in ABAP3.
* The pseudo-comment is checked by the syntax checker: This is false. Pseudo-comments are obsolete and should no longer be used in ABAP. They were replaced by pragmas since SAP NW 7.0 EhP2 (Enhancement Package)4.
References: 1: Pragmas - ABAP Keyword Documentation - SAP Online Help 2: [What are pragmas and pseudo comments in ABAP? | SAP Blogs - SAP Community] 3: ABAP Keyword Documentation - SAP Online Help 4: What are PRAGMAS and Pseudo comments in SAP ABAP
NEW QUESTION # 22
Which ABAP SQL clause allows the use of inline declarations?
- A. INTO
- B. FIELDS
- C. FROM
- D. INTO CORRESPONDING FIELDS OF
Answer: A
Explanation:
The ABAP SQL clause that allows the use of inline declarations is the INTO clause. The INTO clause is used to specify the target variable or field symbol where the result of the SQL query is stored. The INTO clause can use inline declarations to declare the target variable or field symbol at the same position where it is used, without using a separate DATA or FIELD-SYMBOLS statement. The inline declaration is performed using the DATA or @DATA operators in the declaration expression12. For example:
The following code snippet uses the INTO clause with an inline declaration to declare a local variable itab and store the result of the SELECT query into it:
SELECT * FROM scarr INTO TABLE @DATA (itab).
The following code snippet uses the INTO clause with an inline declaration to declare a field symbol <fs> and store the result of the SELECT query into it:
SELECT SINGLE * FROM scarr INTO @<fs>.
You cannot do any of the following:
FROM: The FROM clause is used to specify the data source of the SQL query, such as a table, a view, or a join expression. The FROM clause does not allow the use of inline declarations12.
INTO CORRESPONDING FIELDS OF: The INTO CORRESPONDING FIELDS OF clause is used to specify the target structure or table where the result of the SQL query is stored. The INTO CORRESPONDING FIELDS OF clause does not allow the use of inline declarations. The target structure or table must be declared beforehand using a DATA or FIELD-SYMBOLS statement12.
FIELDS: The FIELDS clause is used to specify the columns or expressions that are selected from the data source of the SQL query. The FIELDS clause does not allow the use of inline declarations. The FIELDS clause must be followed by an INTO clause that specifies the target variable or field symbol where the result is stored12.
NEW QUESTION # 23
Which of the following string functions are predicate functions? Note: There are 2 correct answers to this question.
- A. contains_any_of()
- B. find_any_not_of()
- C. count_any_of()
- D. matchesQ
Answer: A,D
Explanation:
String functions are expressions that can be used to manipulate character-like data in ABAP. String functions can be either predicate functions or non-predicate functions. Predicate functions are string functions that return a truth value (true or false) for a condition of the argument text. Non-predicate functions are string functions that return a character-like result for an operation on the argument text1.
The following string functions are predicate functions:
B) contains_any_of(): This function returns true if the argument text contains at least one of the characters specified in the character set. For example, the following expression returns true, because the text 'ABAP' contains at least one of the characters 'A', 'B', or 'C':
contains_any_of( val = 'ABAP' set = 'ABC' ).
D) matches(): This function returns true if the argument text matches the pattern specified in the regular expression. For example, the following expression returns true, because the text 'ABAP' matches the pattern that consists of four uppercase letters:
matches( val = 'ABAP' regex = '[A-Z]{4}' ).
The following string functions are not predicate functions, because they return a character-like result, not a truth value:
A) find_any_not_of(): This function returns the position of the first character in the argument text that is not contained in the character set. If no such character is found, the function returns 0. For example, the following expression returns 3, because the third character of the text 'ABAP' is not contained in the character set 'ABC':
find_any_not_of( val = 'ABAP' set = 'ABC' ).
C) count_any_of(): This function returns the number of characters in the argument text that are contained in the character set. For example, the following expression returns 2, because there are two characters in the text 'ABAP' that are contained in the character set 'ABC':
count_any_of( val = 'ABAP' set = 'ABC' ).
NEW QUESTION # 24
Image:
In the following ABAP SQL code, what are valid case distinctions? Note: There are 2 correct answers to this question.
- A.
- B.
- C.
Answer: A,B
NEW QUESTION # 25
What are advantages of using a field symbol for internal table row access? Note: There are answers to this question.
- A. Using a field symbol is faster than using a work area.
- B. A MODIFY statement to write changed contents back to the table is not required.
- C. The field symbol can be reused for other programs.
- D. The row content is copied to the field symbol instead to a work area
Answer: A,B
Explanation:
Explanation
A field symbol is a pointer that allows direct access to a row of an internal table without copying it to a work area. Using a field symbol for internal table row access has some advantages over using a work area, such as12:
A MODIFY statement to write changed contents back to the table is not required: This is true. When you use a work area, you have to copy the row content from the internal table to the work area, modify it, and then copy it back to the internal table using the MODIFY statement. This can be costly in terms of performance and memory consumption. When you use a field symbol, you can modify the row content directly in the internal table without any copying. Therefore, you do not need the MODIFY statement12.
Using a field symbol is faster than using a work area: This is true. As explained above, using a field symbol avoids the overhead of copying data between the internal table and the work area. This can improve the performance of the loop considerably, especially for large internal tables. According to some benchmarks, using a field symbol can save 25-40% of the runtime compared to using a work area12.
You cannot do any of the following:
The field symbol can be reused for other programs: This is false. A field symbol is a local variable that is only visible within the scope of its declaration. It cannot be reused for other programs unless it is declared globally or passed as a parameter. Moreover, a field symbol must have the same type as the line type of the internal table that it accesses. Therefore, it cannot be used for any internal table with a different line type12.
The row content is copied to the field symbol instead to a work area: This is false. As explained above, using a field symbol does not copy the row content to the field symbol. Instead, the field symbol points to the memory address of the row in the internal table and allows direct access to it. Therefore, there is no copying involved when using a field symbol12.
References: 1: Using Field Symbols to Process Internal Tables - SAP Learning 2: Access to Internal Tables - ABAP Keyword Documentation - SAP Online Help
NEW QUESTION # 26
After you created a database table in the RESTful Application Programming model, what do you create next?
- A. A service definition
- B. A data model view
- C. A projection view
- D. A metadata extension
Answer: C
Explanation:
After you created a database table in the RESTful Application Programming model (RAP), the next step is to create a projection view on the database table. A projection view is a CDS artefact that defines a view on one or more data sources, such as tables, views, or associations. A projection view can select, rename, or aggregate the fields of the data sources, but it cannot change the properties of the fields, such as whether they are read-only or not. The properties of the fields are inherited from the data sources or the behaviour definitions of the business objects12. For example:
The following code snippet defines a projection view ZI_AGENCY on the database table /DMO/AGENCY:
define view ZI_AGENCY as select from /dmo/agency { key agency_id, agency_name, street, city, region, postal_code, country, phone_number, url } The projection view is used to expose the data of the database table to the service definition, which is the next step in the RAP. The service definition is a CDS artefact that defines the interface and the binding of a service. A service is a CDS entity that exposes the data and the functionality of one or more business objects as OData, InA, or SQL services. A service definition can specify the properties of the fields of a service, such as whether they are filterable, sortable, or aggregatable12. For example:
The following code snippet defines a service definition ZI_AGENCY_SRV that exposes the projection view ZI_AGENCY as an OData service:
define service ZI_AGENCY_SRV { expose ZI_AGENCY as Agency; }
You cannot do any of the following:
A) A metadata extension: A metadata extension is a CDS artefact that defines additional annotations for a CDS entity, such as a business object, a service, or a projection view. A metadata extension can specify the properties of the fields of a CDS entity for UI or analytical purposes, such as whether they are visible, editable, or hidden. However, a metadata extension is not the next step after creating a database table in the RAP, as it is not required to expose the data of the database table to the service definition. A metadata extension can be created later to customize the UI or analytical application that uses the service12.
C) A data model view: A data model view is a CDS artefact that defines a view on one or more data sources, such as tables, views, or associations. A data model view can select, rename, or aggregate the fields of the data sources, and it can also change the properties of the fields, such as whether they are read-only or not. The properties of the fields are defined by the annotations or the behaviour definitions of the data model view. A data model view is used to define the data model of a business object, which is a CDS entity that represents a business entity or concept, such as a customer, an order, or a product. However, a data model view is not the next step after creating a database table in the RAP, as it is not required to expose the data of the database table to the service definition. A data model view can be created later to define a business object that uses the database table as a data source12.
D) A service definition: A service definition is a CDS artefact that defines the interface and the binding of a service. A service is a CDS entity that exposes the data and the functionality of one or more business objects as OData, InA, or SQL services. A service definition can specify the properties of the fields of a service, such as whether they are filterable, sortable, or aggregatable. However, a service definition is not the next step after creating a database table in the RAP, as it requires a projection view or a data model view to expose the data of the database table. A service definition can be created after creating a projection view or a data model view on the database table12.
NEW QUESTION # 27
Which statement can you use to change the contents of a row of data in an internal table?
- A. Update table
- B. Append table
- C. Modify table
- D. Insert table
Answer: C
Explanation:
The statement that can be used to change the contents of a row of data in an internal table is MODIFY table. The MODIFY table statement can be used to change the contents of one or more rows of an internal table, either by specifying the table index, the table key, or a condition. The MODIFY table statement can also be used to change the contents of a database table, by specifying the table name and a work area or an internal table. The MODIFY table statement can use the TRANSPORTING addition to specify which fields should be changed, and the WHERE addition to specify which rows should be changed.
The other statements are not suitable for changing the contents of a row of data in an internal table, as they have different purposes and effects. These statements are:
APPEND table: This statement can be used to add a new row of data to the end of an internal table, either by specifying a work area or an inline declaration. The APPEND table statement does not change the existing rows of the internal table, but only increases the number of rows by one.
INSERT table: This statement can be used to insert a new row of data into an internal table, either by specifying the table index, the table key, or a sorted position. The INSERT table statement does not change the existing rows of the internal table, but only shifts them to make room for the new row. The INSERT table statement can also be used to insert a new row of data into a database table, by specifying the table name and a work area or an inline declaration.
UPDATE table: This statement can be used to update the contents of a database table, by specifying the table name and a work area or an internal table. The UPDATE table statement can use the SET addition to specify which fields should be updated, and the WHERE addition to specify which rows should be updated. The UPDATE table statement does not affect the internal table, but only the corresponding database table.
NEW QUESTION # 28
In which products must you use the ABAP Cloud Development Model? Note: There are 2 correct answers to this question.
- A. SAP S/4HANA Cloud, public edition
- B. SAP BTP, ABAP environment
- C. SAP S/4HANA Cloud, private edition
- D. SAP S/4HANA on premise
Answer: B,C
Explanation:
The ABAP Cloud Development Model is the ABAP development model to build cloud-ready business apps, services, and extensions. It comes with SAP BTP and SAP S/4HANA. It works with public or private cloud, and even on-premise1. However, the complete ABAP Cloud Development Model, including the cloud-optimized ABAP language and public local SAP APIs and extension points, is available only in SAP BTP ABAP Environment and in the 2208/2022 versions of the SAP S/4HANA editions1. Therefore, you must use the ABAP Cloud Development Model in SAP BTP, ABAP environment and SAP S/4HANA Cloud, private edition. You can also use it in SAP S/4HANA on premise, but it is not mandatory. You cannot use it in SAP S/4HANA Cloud, public edition, because it does not allow custom ABAP code2. Reference: 1: ABAP Cloud | SAP Blogs 2: SAP S/4HANA Cloud Extensibility - Overview and Comparison | SAP Blogs
NEW QUESTION # 29
What is the sequence priority when evaluating a logical expression?
- A. NOT 1
- B. A B C
- C. AND 2
- D. OR 3
- E. B A C
- F. A C B
- G. CAB
Answer: C
Explanation:
The sequence priority when evaluating a logical expression is C. A C B, which means NOT, AND, OR. This is the order of precedence of the Boolean operators in ABAP, which determines how the system implicitly parenthesizes all logical expressions that are not closed by explicit parentheses. The operator with the highest priority is evaluated first, and the operator with the lowest priority is evaluated last. The order of precedence of the Boolean operators in ABAP is as follows12:
* NOT: The NOT operator is a unary operator that negates the logical expression that follows it. It has the
* highest priority and is evaluated before any other operator. For example, in the expression NOT a AND b, the NOT operator is applied to a first, and then the AND operator is applied to the result and b.
* AND: The AND operator is a binary operator that returns true if both logical expressions on its left and right are true, and false otherwise. It has the second highest priority and is evaluated before the OR and EQUIV operators. For example, in the expression a AND b OR c, the AND operator is applied to a and b first, and then the OR operator is applied to the result and c.
* OR: The OR operator is a binary operator that returns true if either or both logical expressions on its left and right are true, and false otherwise. It has the third highest priority and is evaluated after the NOT and AND operators, but before the EQUIV operator. For example, in the expression a OR b EQUIV c, the OR operator is applied to a and b first, and then the EQUIV operator is applied to the result and c.
* EQUIV: The EQUIV operator is a binary operator that returns true if both logical expressions on its left and right have the same truth value, and false otherwise. It has the lowest priority and is evaluated after all other operators. For example, in the expression a AND b EQUIV c OR d, the EQUIV operator is applied to a AND b and c last, after the AND and OR operators are applied.
References: 1: log_exp - Boolean Operators and Parentheses - ABAP Keyword Documentation - SAP Online Help 2: Logical Expressions (log_exp) - ABAP Keyword Documentation - SAP Online Help
NEW QUESTION # 30
You want to provide a short description of the data definition for developers that will be attached to the database view
Which of the following annotations would do this if you inserted it on line #27
- A. @UI headerinto description label
- B. @EndUserText.quickInfo
- C. @UI.badge.title.label
- D. @EndUserText label
Answer: D
Explanation:
The annotation that can be used to provide a short description of the data definition for developers that will be attached to the database view is the @EndUserText.label annotation. This annotation is used to specify a text label for the data definition that can be displayed in the development tools or in the documentation. The annotation can be inserted on line #27 in the code snippet provided in the question12. For example:
The following code snippet uses the @EndUserText.label annotation to provide a short description of the data definition for the CDS view ZCDS_VIEW:
@AbapCatalog.sqlViewName: 'ZCDS_VIEW' @AbapCatalog.compiler.compareFilter: true @AbapCatalog.preserveKey: true @AccessControl.authorizationCheck: #CHECK @EndUserText.label: 'CDS view for flight data' "short description for developers define view ZCDS_VIEW as select from sflight { key carrid, key connid, key fldate, seatsmax, seatsocc } You cannot do any of the following:
@UI.headerInfo.description.label: This annotation is used to specify a text label for the description field of the header information of a UI element. This annotation is not relevant for the data definition of a database view12.
@UI.badge.title.label: This annotation is used to specify a text label for the title field of a badge UI element. This annotation is not relevant for the data definition of a database view12.
@EndUserText.quickInfo: This annotation is used to specify a quick information text for the data definition that can be displayed as a tooltip in the development tools or in the documentation. This annotation is not the same as a short description or a label for the data definition12.
NEW QUESTION # 31
What are some of the reasons that Core Data Services are preferable to the classical approach to data modeling? Note: There are 2 correct answers to this question.
- A. They transfer computational results to the application server.
- B. They avoid data transfer completely.
- C. They implement code pushdown.
- D. They compute results on the application server.
Answer: A,C
Explanation:
Explanation
Core Data Services (CDS) are preferable to the classical approach to data modeling for several reasons, but two of them are:
They implement code pushdown. Code pushdown is the principle of moving data-intensive logic from the application server to the database server, where the data resides. This reduces the data transfer between the application server and the database server, which improves the performance and scalability of the application. CDS enable code pushdown by allowing the definition of semantic data models and business logic in the database layer, using SQL and SQL-based expressions1.
They transfer computational results to the application server. CDS allow the application server to access the data and the logic defined in the database layer by using Open SQL statements. Open SQL is a standardized and simplified subset of SQL that can be used across different database platforms. Open SQL statements are translated into native SQL statements by the ABAP runtime environment and executed on the database server. The results of the computation are then transferred to the application server, where they can be further processed or displayed2.
References: 1: ABAP - Core Data Services (ABAP CDS) - ABAP Keyword Documentation 2: Open SQL - ABAP Keyword Documentation
NEW QUESTION # 32
Which extensibility type does SAP recommend you use to enhance the existing UI for an SAP Fiori app?
- A. Developer
- B. Key user
- C. Side-by-side
- D. Classic
Answer: A
Explanation:
Explanation
According to the SAP clean core extensibility and ABAP cloud topic, SAP recommends using developer extensibility to enhance the existing UI for an SAP Fiori app. Developer extensibility allows you to use the UI adaptation editor in SAP Web IDE to modify the UI layout, add or remove fields, and bind them to the data model. You can also use the SAPUI5 framework to create custom controls, views, and controllers. Developer extensibility is based on the in-app extensibility concept, which means that the extensions are part of the same application and are deployed together with the app. Developer extensibility requires developer skills and access to the source code of the app. References: SAP Learning Hub, SAP S/4HANA Cloud Extensibility - In-App Extensibility, SAP Fiori: Extensibility
NEW QUESTION # 33
Which RESTful Application Programming object can be used to organize the display of fields in an app?
- A. Projection view
- B. Service definition
- C. Data model view
- D. Metadata extension
Answer: D
Explanation:
A metadata extension is a RESTful Application Programming object that can be used to organize the display of fields in an app. A metadata extension is a CDS view that annotates another CDS view with UI annotations, such as labels, icons, or facets. These annotations define how the data should be presented in the app, such as which fields should be shown on the object page, which fields should be editable, or which fields should be used for filtering or sorting. A metadata extension can also be used to add custom actions or validations to the app12. Reference: 1: Refine the Object Page with Annotations | SAP Tutorials 2: ABAP RAP : Enabling custom actions with a dialog for additional input fields | SAP Blogs
NEW QUESTION # 34
Exhibit:
What are valid statements? Note: There are 3 correct answers to this question.
- A. go_cll may call method ml with go_dl->ifl-ml().
- B. Instead of go_cll = NEW #() you could use go_iff - NEW #(...).
- C. go_ifl may call method m2 with go if->m2(...).
- D. go_if 1 may call method ml with go_ift->ml().
- E. Instead of go ell = NEW #(...) you could use go ifl = NEW cll(. ... ).
Answer: C,D,E
Explanation:
The following are the explanations for each statement:
A: This statement is valid. go_ifl may call method ml with go_ifl->ml(). This is because go_ifl is a data object of type REF TO ifl, which is a reference to the interface ifl. The interface ifl defines a method ml, which can be called using the reference variable go_ifl. The class cll implements the interface ifl, which means that it provides an implementation of the method ml. The data object go_ifl is assigned to a new instance of the class cll using the NEW operator and the inline declaration operator @DATA. Therefore, when go_ifl->ml() is called, the implementation of the method ml in the class cll is executed123 B: This statement is valid. Instead of go_cll = NEW #(...) you could use go_ifl = NEW cll(...). This is because go_ifl is a data object of type REF TO ifl, which is a reference to the interface ifl. The class cll implements the interface ifl, which means that it is compatible with the interface ifl. Therefore, go_ifl can be assigned to a new instance of the class cll using the NEW operator and the class name cll. The inline declaration operator @DATA is optional in this case, as go_ifl is already declared. The parentheses after the class name cll can be used to pass parameters to the constructor of the class cll, if any123 E: This statement is valid. go_ifl may call method m2 with go_ifl->m2(...). This is because go_ifl is a data object of type REF TO ifl, which is a reference to the interface ifl. The class cll implements the interface ifl, which means that it inherits all the components of the interface ifl. The class cll also defines a method m2, which is a public method of the class cll. Therefore, go_ifl can call the method m2 using the reference variable go_ifl. The method m2 is not defined in the interface ifl, but it is accessible through the interface ifl, as the interface ifl is implemented by the class cll. The parentheses after the method name m2 can be used to pass parameters to the method m2, if any123 The other statements are not valid, as they have syntax errors or logical errors. These statements are:
C: This statement is not valid. go_cll may call method ml with go_cll->ifl~ml(). This is because go_cll is a data object of type REF TO cll, which is a reference to the class cll. The class cll implements the interface ifl, which means that it inherits all the components of the interface ifl. The interface ifl defines a method ml, which can be called using the reference variable go_cll. However, the syntax for calling an interface method using a class reference is go_cll->ml(), not go_cll->ifl~ml(). The interface component selector ~ is only used when calling an interface method using an interface reference, such as go_ifl->ifl~ml(). Using the interface component selector ~ with a class reference will cause a syntax error123 D: This statement is not valid. Instead of go_cll = NEW #() you could use go_ifl = NEW #(...). This is because go_ifl is a data object of type REF TO ifl, which is a reference to the interface ifl. The interface ifl cannot be instantiated, as it does not have an implementation. Therefore, go_ifl cannot be assigned to a new instance of the interface ifl using the NEW operator and the inline declaration operator @DATA. This will cause a syntax error or a runtime error. To instantiate an interface, you need to use a class that implements the interface, such as the class cll123
NEW QUESTION # 35
In a RESTful Application Programming application, in which objects do you bind a CDS view to create a value help? Note: There are 3 correct answers to this question.
- A. Projection View
- B. Service Definition
- C. Metadata Extension
- D. Data model view
- E. Behavior definition
Answer: A,C,D
NEW QUESTION # 36
After you created a database table in the RESTful Application Programming model, what do you create next?
- A. A service definition
- B. A data model view
- C. A projection view
- D. A metadata extension
Answer: C
Explanation:
After you created a database table in the RESTful Application Programming model (RAP), the next step is to create a projection view on the database table. A projection view is a CDS artefact that defines a view on one or more data sources, such as tables, views, or associations. A projection view can select, rename, or aggregate the fields of the data sources, but it cannot change the properties of the fields, such as whether they are read-only or not. The properties of the fields are inherited from the data sources or the behaviour definitions of the business objects12. For example:
* The following code snippet defines a projection view ZI_AGENCY on the database table
/DMO/AGENCY:
define view ZI_AGENCY as select from /dmo/agency { key agency_id, agency_name, street, city, region, postal_code, country, phone_number, url } The projection view is used to expose the data of the database table to the service definition, which is the next step in the RAP. The service definition is a CDS artefact that defines the interface and the binding of a service.
A service is a CDS entity that exposes the data and the functionality of one or more business objects as OData, InA, or SQL services. A service definition can specify the properties of the fields of a service, such as whether they are filterable, sortable, or aggregatable12. For example:
* The following code snippet defines a service definition ZI_AGENCY_SRV that exposes the projection view ZI_AGENCY as an OData service:
define service ZI_AGENCY_SRV { expose ZI_AGENCY as Agency; }
You cannot do any of the following:
* A. A metadata extension: A metadata extension is a CDS artefact that defines additional annotations for a CDS entity, such as a business object, a service, or a projection view. A metadata extension can specify the properties of the fields of a CDS entity for UI or analytical purposes, such as whether they are visible, editable, or hidden. However, a metadata extension is not the next step after creating a database table in the RAP, as it is not required to expose the data of the database table to the service definition. A metadata extension can be created later to customize the UI or analytical application that uses the service12.
* C. A data model view: A data model view is a CDS artefact that defines a view on one or more data sources, such as tables, views, or associations. A data model view can select, rename, or aggregate the fields of the data sources, and it can also change the properties of the fields, such as whether they are read-only or not. The properties of the fields are defined by the annotations or the behaviour definitions of the data model view. A data model view is used to define the data model of a business object, which is a CDS entity that represents a business entity or concept, such as a customer, an order, or a product.
However, a data model view is not the next step after creating a database table in the RAP, as it is not required to expose the data of the database table to the service definition. A data model view can be created later to define a business object that uses the database table as a data source12.
* D. A service definition: A service definition is a CDS artefact that defines the interface and the binding of a service. A service is a CDS entity that exposes the data and the functionality of one or more business objects as OData, InA, or SQL services. A service definition can specify the properties of the fields of a service, such as whether they are filterable, sortable, or aggregatable. However, a service definition is not the next step after creating a database table in the RAP, as it requires a projection view or a data model view to expose the data of the database table. A service definition can be created after creating a projection view or a data model view on the database table12.
References: 1: ABAP CDS - Data Definitions - ABAP Keyword Documentation - SAP Online Help 2: ABAP CDS - Service Definitions - ABAP Keyword Documentation - SAP Online Help
NEW QUESTION # 37
In the assignment, data (gv_result) = 1/8. what will be the data type of gv_result?
- A. TYPE P DECIMALS 2
- B. TYPE DEFLOAT 16
- C. TYPE P DECIMALS 3
- D. OTYPE I
Answer: B
Explanation:
The data type of gv_result in the assignment data (gv_result) = 1/8 will be TYPE DECFLOAT 16. This is because the assignment operator (=) in ABAP performs an implicit type conversion from the source type to the target type, according to the following rules12:
If the target type is specified explicitly, the source value is converted to the target type.
If the target type is not specified explicitly, the source type is used as the target type, unless the source type is a literal or an expression, in which case the target type is determined by the following priority order: DECFLOAT34, DECFLOAT16, P, F, I, C, N, X, STRING, XSTRING.
In this case, the target type is not specified explicitly, and the source type is an expression (1/8). Therefore, the target type is determined by the priority order, and the first matching type is DECFLOAT16, which is a decimal floating point type with 16 digits of precision12.
NEW QUESTION # 38
In which products must you use the ABAP Cloud Development Model? Note: There are 2 correct answers to this question.
- A. SAP S/4HANA Cloud, public edition
- B. SAP BTP, ABAP environment
- C. SAP S/4HANA Cloud, private edition
- D. SAP S/4HANA on premise
Answer: B,C
Explanation:
The ABAP Cloud Development Model is the ABAP development model to build cloud-ready business apps, services, and extensions. It comes with SAP BTP and SAP S/4HANA. It works with public or private cloud, and even on-premise1. However, the complete ABAP Cloud Development Model, including the cloud-optimized ABAP language and public local SAP APIs and extension points, is available only in SAP BTP ABAP Environment and in the 2208/2022 versions of the SAP S/4HANA editions1. Therefore, you must use the ABAP Cloud Development Model in SAP BTP, ABAP environment and SAP S/4HANA Cloud, private edition. You can also use it in SAP S/4HANA on premise, but it is not mandatory. You cannot use it in SAP S/4HANA Cloud, public edition, because it does not allow custom ABAP code2. References: 1: ABAP Cloud | SAP Blogs 2: SAP S/4HANA Cloud Extensibility - Overview and Comparison | SAP Blogs
NEW QUESTION # 39
......
SAP C-ABAPD-2309 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
The Best SAP C-ABAPD-2309 Study Guides and Dumps of 2024: https://www.vceprep.com/C-ABAPD-2309-latest-vce-prep.html
Top SAP C-ABAPD-2309 Exam Audio Study Guide! Practice Questions Edition: https://drive.google.com/open?id=1ieTyZEDS7HMkusTa2TZyIFDZBLHtsQQk