Excellent 72300X PDF Dumps With 100% VCEPrep Exam Passing Guaranted [Sep-2021]
100% Pass Your 72300X Avaya Aura® Communication Applications Support Exam at First Attempt with VCEPrep
NEW QUESTION 21
Which statement about Remote Workers on Avaya Session Border Controller for Enterprise (SBCE) is true?
- A. With SBCE, Remote Workers have less telephone features available compared to Office Workers.
- B. With SBCE, Remote Workers have to come to the office to get new firmware on their phones.
- C. With SBCE, Remote Workers must use a different dial plan to Office Workers.
- D. With SBCE, Remote Workers no longer need to use Virtual Private Network (VPN).
Answer: C
NEW QUESTION 22
Which two trace tools are available for Session Manager? (Choose two.)
- A. thetraceSMcommand on the Session Manager Command Line Interface
- B. theCallTracecommand on the Session Manager Command Line Interface
- C. theList tracecommand on the Session Manager Command Line Interface
- D. Pcap
- E. Trace Viewer in the System Manager GUI
Answer: A,E
NEW QUESTION 23
Which three statements about the Avaya Session Border Controller for Enterprise (SBCE) are true? (Choose three.)
- A. You can SSH to Avaya Session Border Controller for Enterprise using PuTTY with standard port 22.
- B. You must use HTTPS as opposed to HTTP when web browsing to the Element Management System (EMS).
- C. Split horizon DNS with FQDN is recommended to allow smartphones to seamlessly register with Avaya Session Border Controller for Enterprise, when out of range of Wi-Fi over the Mobile network, and register direct with Avaya Aura Session Manager when connected to a corporate Wi-Fi.
- D. When ignoring traffic considerations, it is possible to co-reside WebRTC, Remote Worker, and SIP Trunking applications on the same Avaya Session Border Controller for Enterprise (SBCE).
- E. Remote Worker and SIP Trunking can use the same IP addresses for both services.
Answer: A,B,C
NEW QUESTION 24
A customer reports that they cannot place calls to the Public Network using the SIP Service Provider after a technician had finished fixing an issue in the Session Border Controller (SBC).
Within Avaya SBC, in which three places do you check the configuration of the SIP Trunks? (Choose three.)
- A. Server Configuration
- B. PPM Services
- C. Media Interface
- D. Routine Configuration
- E. Signaling Interfaces
Answer: A,D,E
NEW QUESTION 25
To validate the initial system status of Breeze with the WebRTC Snap-I, which two components should be checked? (Choose two.)
- A. installation status
- B. licensing status
- C. cluster status
- D. application
- E. configured certificates
Answer: A,D
NEW QUESTION 26
Which tracing tools that help to debug WebRTC protocols are available on the Avaya Breeze™ platform?
- A. traceWEB and traceSM
- B. traceTURN, traceSTUN, and traceHTTP
- C. traceSTUN, traceTURN, and traceCE
- D. traceHTTP and traceCE
Answer: A
Explanation:
Explanation
https://downloads.avaya.com/css/P8/documents/100182172
NEW QUESTION 27 
Refer to the exhibit.
In the Cluster Administration screen of a PresenceServices cluster, when you try to change the cluster state to Accept New Service, you receive the error:
Servers that are not in License Restricted mode assigned to the cluster are below the Minimum number of required servers.
You check that a server has been administered under Breeze > Server Administration which shows green check under License Mode, and a System State of Denying.
Which action needs to be taken to solve this problem?
- A. Edit the cluster to change the cluster profile from Core Platform to General Purpose.
- B. Under Avaya Breeze > Server Administration, select the server and change the System State to Accept New Service, then return to the Cluster Administration screen and set the cluster to Accept New Service.
- C. Edit the Cluster, access the Servers tab, and assign the server to the cluster; then set the cluster to Accept New Service.
- D. Obtain and install an Avaya Breeze™ license on webLM with more instances of Avaya Breeze™ nodes.
Answer: B
NEW QUESTION 28
A technician is trying to access the Avaya Aura Media Server (AAMS) after receiving a troubleshooting ticket. After failing to enter the system using different web browsers, the technician realizes the incorrect URL was being used.
Which URL must be used to access the AAMS web page?
- A. http: AAMS FQDN or IP address:8443/emlogin
- B. https: AAMS FQDN or IP address:443/emlogin
- C. https: SMGR FQDN or IP address:8443/emlogin
- D. https: AAMS FQDN or IP address:8443/emlogin
Answer: D
NEW QUESTION 29
The WebRTC snap-in is showing a yellow caution icon under License Mode.
What does this error mode indicate?
- A. The license 30 day grace period has expired.
- B. There is a license error but the snap-in continues to function.
- C. The snap-in license has expired and is out of service.
- D. The license was installed incorrectly.
Answer: B
NEW QUESTION 30
What are two valid Avaya Aura® Messaging (AAM) Measurement Report types? (Choose two.)
- A. Occupancy
- B. Feature
- C. Load
- D. Disk Usage
- E. Users
Answer: B,C
NEW QUESTION 31
Which tool has an option to debug the TLS handshake between the server and the client?
- A. traceSM
- B. List trace tac 701/tls
- C. SIP Trace Config and SIP Trace Viewer
- D. List trace tac 701
Answer: A
NEW QUESTION 32
Incoming SIP Trunking calls from Service Provider to Session Manager are failing because Avaya Session Border Controller for Enterprise (SBCE) is not sending a domain name in the TO, FROM and REQUEST headers.
What needs to be changed in SBCE to make this happen?
- A. In SBCE GUI, navigate to Device Specific Settings > Endpoint Flows > Server Flows. Edit the Session Manager flow to change the End Point Policy Group to default-low.
- B. In SBCE GUI, navigate to Global Profiles > Topology Hiding. Edit the SessionManager_TH to change the To, From and Request Headers Replace Action, to Overwrite with domain name.
- C. In SBCE GUI, navigate to Global Profiles > Routing. Edit the Session Manager Routing Profile to link to a URI Group, which has the To, From and Request Headers and Replace Action set to Overwrite with domain name.
- D. In SBCE GUI, navigate to Global Profiles > Server Configuration. Edit the Session Manager server entry to set "Overwrite Domain Name".
Answer: B
NEW QUESTION 33
In Avaya Aura® 7 the Avaya Session Border Controller for Enterprise (SBCE) license is installed on a System Manager (SMGR) WebLM server. The EMS points to the WebLM server using a URL.
What is the correct syntax of the URL where 135.xxx.xxx.xxx. is the IP address of the SMGR WebLM server?
- A. https://135.xx.xxx.xx:8080/LicenseServer
- B. https://135.xx.xxx.xx/WebLM
- C. https://135.xx.xxx.xx:8443/WebLM/LicenseServer
- D. https://135.xx.xxx.xx:52233/WebLM/LicenseServer
Answer: D
NEW QUESTION 34
To validate the initial system status of Avaya Breeze with the WebRTC Snap-in, which three components should be checked? (Choose three.)
- A. Cluster Status
- B. Configured certificates
- C. Installation status
- D. Licensing mode
- E. WebRTC Service within Service Management > Services
Answer: A,D,E
NEW QUESTION 35
In Avaya Aura® 7 the Avaya Session Border Controller for Enterprise (SBCE) license is installed on an external WebLM server and the EMS points to the WebLM server using a URL.
What is the correct syntax of that URL where 135.60.232.41 is the IP address of the WebLM server?
- A. https://135.60.232.41:52233/WebLM/LicenseServer
- B. https://135.60.232.41:8080/LicenseServer
- C. https://135.60.232.41:8443/WebLM/LicenseServer
- D. https://135.60.232.41/WebLM
Answer: A
NEW QUESTION 36
In which way can you check if the Avaya Session Border Controller (SBC) is using the correct server certificate?
- A. Using System Manager (SMGR), navigate to Dashboard > TLS Management > Certificates
- B. Using Avaya SBC, navigate to Dashboard > TLS Management > Server Profiles
- C. Using Avaya SBC, navigate to Dashboard > Security > Certificates
- D. Using System Manager (SMGR), navigate to Services > Security > Certificates
Answer: B
NEW QUESTION 37
A customer reports that their Avaya Aura Communication Manager (CM) enabled SIP telephones (AST) can only see the effect of their telephone being Call Forwarded after they log off and log on again. Also stopping the call forward feature does not show until their endpoint is logged off and logged on again.
What is the cause of the problem?
- A. A coverage path has not been setup.
- B. An entry is missing in the private-numbering System Administration Terminal (SAT) form.
- C. Data Privacy is enabled in the station's Class of Service.
- D. The Call Forwarding feature has not been assigned to a button.
Answer: C
NEW QUESTION 38
A maintenance engineer logs onto the Command Line Interface (CLI) of Avaya Aura Messaging (AAM) and issues the vmstat command.
What information will the display present?
- A. The count of mailbox password violation attempts
- B. The amount of virtual memory used
- C. The status information about the virtual machine
- D. The statistical information about voicemail boxes
Answer: B
NEW QUESTION 39
When a user is forwarded to Avaya Aura® Messaging (AAM), Avaya Aura® Communication Manager (CM) needs to indicate to AAM who the call was originally destined for, so that the message is left in the correct mailbox.
Which SIP header is used to indicate for whom the call was originally destined, and the reason for being forwarded to AAM?
- A. To
- B. P-Asserted-Identity
- C. Request
- D. B = history info
Answer: B
Explanation:
Explanation
On trunk group form page 4 set "Identity for Calling Party Display: P-Asserted-Identity"
NEW QUESTION 40
Considering the message flow to an Avaya Aura® Contact Centre (AACC) Agent Desktop, which protocol is used to communicate between Avaya Aura® Communication Manager (CM) and Avaya Aura® Application Enablement Services (AES)?
- A. TR87
- B. ASAI/TSAPI
- C. DMCC/TSAPI
- D. WCF
Answer: A
NEW QUESTION 41 
Refer to the exhibit.
After some system maintenance was completed over the weekend, a customer calling from the office states they hear a fast busy when trying to access their voicemail.
Avaya support verifies local network connectivity is up and Avaya Aura Messaging server is registering no alarms. A SIP trace displays a 404 Not Found error message.
Based on what is already working, to where can the issue potentially be isolated?
- A. network outage
- B. endpoint routing configuration issue
- C. routing configuration issues
- D. interoperability testing
Answer: C
NEW QUESTION 42 
Refer to the exhibit.
In the Cluster Administration screen of a PresenceServices cluster, when you try to change the cluster state to Accept New Service, you receive the error:
Servers that are not in License Restricted mode assigned to the cluster are below the Minimum number of required servers.
You check that a server has been administered under Engagement Development Platform > Server Administration which shows green check under License Mode, and a System State of Denying.
Which action needs to be taken to solve this problem?
- A. Under Engagement Development Platform > Server Administration, select the server and change the System State to Accept New Service, then return to the Cluster Administration screen and set the cluster to Accept New Service.
- B. Edit the cluster to change the cluster profile from Core Platform to General Purpose.
- C. Edit the Cluster, access the Servers tab, and assign the server to the cluster; then set the cluster to Accept New Service.
- D. Obtain and install an Avaya Breeze™ license on webLM with more instances of Avaya Breeze™ nodes.
Answer: A
NEW QUESTION 43
After completing Discipline 4, Determining Root Cause, of the 8D Troubleshooting Methodology, what is the next discipline to be completed?
- A. Discipline 5 - Prevent Recurrences
- B. Discipline 5 - Implement a Work-around
- C. Discipline 5 - Choose Corrective Actions
- D. Discipline 5 - Implement Corrective Actions
Answer: C
NEW QUESTION 44
What are two ways to view the ipcs.log file of an Avaya Session Border Controller for Enterprise (SBCE) High Availability (HA) system? (Choose two.)
- A. Login to the EMS using a web browser, then click on the active SBCE under Installed Devices, then click on View System Logs.
- B. Login to the EMS using a web browser, then click on Logs > System Logs.
- C. Login to the active SBCE, and cat /archive/syslog/ipcs/ipcs.log.
- D. Login to the EMS and cat /var/log/ipcs.log.
- E. Login to the EMS and cat /archive/syslog/ipcs/ipcs.log.
Answer: B,C
NEW QUESTION 45
......
Trend for 72300X pdf dumps before actual exam: https://www.vceprep.com/72300X-latest-vce-prep.html