100% Pass Top-selling NS0-176 Exams - New 2021 Network Appliance Pratice Exam
Cisco and NetApp FlexPod Dumps NS0-176 Exam for Full Questions - Exam Study Guide
NEW QUESTION 43
How should the speed be configured on the Nexus 5548 port connecting to the Nexus 1100-X?
- A. Speed 1000
- B. It should not be configured - the 5548 will auto detect the correct speed
- C. Speed 10
- D. Speed 1G
- E. Speed 1000000
Answer: A
NEW QUESTION 44
You have a NetApp clustered Data ONTAP storage system and vSphere 6 cluster. You discover that VMware VAAI for NFS is not showing as enabled on one of the five ESXi hosts in your vSphere cluster.
In this scenario, what must you do to enable VAAI for NFS on that ESXi host?
- A. Set the DataMover. HardwareAcceleratedInit advanced setting to 0 on the ESXi host.
- B. Install the NetApp NFS Plug-in for VMware VAAI on the ESXi host.
- C. Enable NFSv3 on the storage system.
- D. Enable VMware vStorage for NFS on the NetApp SVM.
Answer: C
NEW QUESTION 45
You are installing two NetApp FAS8080 EX controllers.
Which two ports would you use for HA connectivity? (Choose two.)
- A. ib0a
- B. ib0b
- C. e0e
- D. eof
Answer: A,B
NEW QUESTION 46
You are an administrator of a UCS system. You notice that when you apply a setting that requires a reboot, the affected hardware reboots immediately without warning. You would like to reboot to be acknowledged by an administrator instead.
What should you do to accomplish this task?
- A. Create aa BIOS policy.
- B. Create a scrub policy.
- C. Create a maintenance policy.
- D. Create updating templates.
Answer: C
NEW QUESTION 47
Which policy detail should be set if you want a server to be exempt from all power capping?
- A. Create a Power Control Policy select cap and set the priority to 1
- B. Create a Power Control Policy and set Power Capping to No Cap
- C. The UCS Power Cap feature should not be utilized in a FlexPod environment.
- D. Create a Power Group with the appropriate chassis and set the Group Budget Power Cap (W) to 0.
Answer: B
NEW QUESTION 48
You are creating the Gold Master Boot LUN for Windows 2012 R2 Hyper-V hosts.
In this scenario, which three steps are needed to ensure that all Hyper-V hosts will work as desired? (Choose three.)
- A. Disassociate the service profile before cloning the LUN.
- B. Use Sysprep to prepare the operating system for duplication.
- C. Map all Hyper-V hosts to the same Gold Master Boot LUN for consistency.
- D. Use a temporary service profile to install and configure the OS.
- E. Enter in the Windows license key to activate Windows before cloning the LUN.
Answer: C,D,E
NEW QUESTION 49
Which three actions are required to configure two Cisco Nexus switches as vPC peers? (Choose three.)
- A. Create a peer link between switches.
- B. Enable the vPC feature.
- C. Configure matching vPC domain IDs.
- D. Modify the network QoS policy.
- E. Configure different vPC domain IDs for each switch.
Answer: A,C,D
NEW QUESTION 50
Which two NetApp storage solutions are supported in FlexPod solutions? (Choose two.)
- A. ONTAP Select
- B. NetApp Storage GRID
- C. NetApp E-Series
- D. NetApp AFF
Answer: C,D
NEW QUESTION 51
Your company is looking for a small remote office infrastructure to deploy to your 30 remote sites. You are asked to write deployment procedures for each site. Your goal is to have each site deployed in less than a day.
Which tool will help you accomplish your goal?
- A. OnCommand System Manager
- B. UCS Director
- C. UCS Manager
- D. OnCommand Insight
Answer: B
NEW QUESTION 52
Which LIF role is used for SnapMirror traffic on a system running clustered Data ONTAP?
- A. intercluster
- B. node-management
- C. interconnect
- D. cluster-management
Answer: A
NEW QUESTION 53
Exhibit:
An administrator is building a FlexPod configuration with UCS 6296 Fabric Interconnect devices that support legacy Fibre Channel 9FC) connections. The administrator uses UCS Manager to configure the unified ports on the Fabric Interconnect.
Referring to the exhibit, how many ports will FC use after the configuration is completed?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 54
An administrator just finished installing Windows Server 2012 (Core) with Hyper-V.
Now the administrator must deploy a new VM using PowerShell with the parameters shown below.
--Name: web server
--Memory: 10 GB
--Hard Drive: Existing Disk (d:\vhd\BaseImage.vhdx)
Which PowerShell command creates the VM based on the Information in the scenario?
- A. New-VM-Name "web server"- MemoryStartupbytes 10 GB - VHDPath d:\vhd\BaseImage.vhdx -NewVHDSireBytes 6000000
- B. New-VM-Name web server-MemoryStartupbytes 1 GB- VHDPath BaseImage.vhdx
- C. New-VM-Name "web server" - MemoryStartupbytes 10 GB- VHDPath d:\vhd\BaseImage.vhdx
- D. new- VM- Name web server- MemoryStartupBytes 10GB- VHDPath BaseImage.vhdx
Answer: C
NEW QUESTION 55
Which is a valid connectivity option for a FlexPod?
Note some of these may also be 'valid' options outside of a FlexPod architecture but do not specifically meet FlexPod scalability and availability requirements.
- A. UCS C-Series direct attach FAS
- B. UCS B-Series > 2232PP FEX > UCS FI > Nexus 5548 < FAS
- C. UCS C-Series > 2232PP FEX > UCS FI > Nexus 5548 < FAS
- D. UCS B-Series direct attach FAS
- E. UCS C-Series > Nexus 3048 < FAS
- F. UCS B-series > UCS FI > 2232PP FEX > Nexus 5548 < FAS
- G. UCS B-Series > UCS FI > Catalyst 3750 < FAS
Answer: C,E
NEW QUESTION 56
Under which tab in UCS Manager would you create a boot policy?
- A. SAN
- B. Servers
- C. Equipment
- D. LAN
Answer: B
NEW QUESTION 57
An administrator has a FlexPod solution with VMware vSphere. The administrator is migrating all network traffic from standard switches to vSphere distributed switches.
Virtual machines (VMs) are currently using VM port groups called VLAN_500 and VLAN_501 on standard virtual switch vSwitch3. A new distributed switch called dvSwitch_VM is created and new distributed port groups are configured for each VM traffic VLAN. VMs are configured to use the new port groups.
After the change, VMs on VLAN 501 report a loss of network connectivity; however, VMs on VLAN 500 are not showing any connectivity issues. The symptoms are experienced for VMs on all ESXi hosts.
Which action must the administrator perform to solve the problem?
- A. Add the correct VLAN ID to the new distributed port group for VLAN 501.
- B. Configure the dvSwitch_VM port binding to Ephemeral.
- C. Reboot the virtual machines to re-establish network connectivity.
- D. Create a new vmkernel port on dvSwitch_VM for VLAN 501.
Answer: B
NEW QUESTION 58
......
Authentic Best resources for NS0-176 Online Practice Exam: https://www.vceprep.com/NS0-176-latest-vce-prep.html
NS0-176 Test Engine Practice Exam: https://drive.google.com/open?id=1Hkw9dYZA9P0Om5wS3KLp0uXAwG3JdzWj