F5 101 Exam Prep Guide: Prep guide for the 101 Exam
2023 New Preparation Guide of F5 101 Exam
F5 101 exam is an essential certification for professionals who want to establish their careers in application delivery networking. It provides a comprehensive understanding of F5 products and services, and it is recognized by the industry as a benchmark for application delivery expertise. It is an excellent way for professionals to validate their skills and knowledge in application delivery networking and demonstrate their commitment to professional development. Passing the F5 101 exam can open up new opportunities for professionals in the field of application delivery networking.
NEW QUESTION # 124
An LTM has the 3 virtual servers, 2 SNATs, four self IP addresses defined and the networks shown in the exhibit. Selected options for each object are shown below. Settings not shown are at their defaults. Assume port exhaustion has not been reached.
A connection attempt is made with a source IP and port of 10.20.100.50:2222 and a destination IP and port of
10.10.2.102:443.
When the request is processed, what will be the source and destination IP addresses?
- A. Source IP: 10.10.2.103; Destination IP: 10.10.2.102
- B. Source IP: 10.10.201; Destination IP: 10.102.102
- C. Source IP: 10.20.10.50; Destination IP: pool member in the 192.168/16 network
- D. Source IP: 10.10.2.103; Destination IP: pool member in the 192.168/16 network
- E. The request will be dropped.
- F. Source IP: 10.10.201; Destination IP: pool member in the 192.168/16 network G
Answer: A
NEW QUESTION # 125
The LTM "Manager" authentication role can create iRules.
- A. True
- B. False
Answer: A
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 126
Which is a potential result when a trunk is configured on a BIG-IP?
- A. Packets flowing to the VLAN could arrive on any of the interfaces in the trunk
- B. VLAN fail-safe is not available for any VLAN associated with any trunks.
- C. No additional trunks can be configuration since each BIG-IP is limited to one trunk
- D. Since any VLANs associated with the trunk are necessarily associated with multiple interfaces, the VLAN using the must use tagged packets.
Answer: A
NEW QUESTION # 127
GTM solves which three of these standard DNS limitations?
- A. It can ensure that clients remain at the same data center for stateful applications
- B. It can verify that a client does not have any viruses before sending the IP address
- C. It can use HTTPS for the connection between itself and the client
- D. It can verify that a host is available before resolving a host name for a client
- E. It has more complex load balancing methods
Answer: A,D,E
Explanation:
Explanation/Reference:
Explanation:
GTM solves three of these standard DNS limitations
It can verify that ahost is available before resolving a host name for a client It can ensure that clients remain at the same data center for stateful applications It has more complex load balancing methods
NEW QUESTION # 128
Which of the following is NOT a profile type on the BIG-IP?
- A. Persistence
- B. Authentication
- C. SSL
- D. Application
- E. Protocol
Answer: D
NEW QUESTION # 129
Using IP Geolocation, an organization can always direct a client request from France to a datacenter in Dublin.
- A. True
- B. False
Answer: A
NEW QUESTION # 130
APM can verify which four of the following details before granting a user access to a resource? (Choose four.)
- A. Groups the user is a member of
- B. User's hard drive encryption software
- C. The user's username
- D. The user's computer
- E. The network speed
- F. The user's Web browser
Answer: A,C,D,F
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 131
A virtual server is defined per the charts. The last five client connections were to members C, D, A, B, B.
Given the conditions shown in the above graphic, if a client with IP address 205.12.45.52 opens a connection to the virtual server, which member will be used for the connection?
- A. 172.16.20.1:80
- B. 172.16.20.3:80
- C. 172.16.20.4:80
- D. 172.16.20.5:80
- E. 172.16.20.2:80
Answer: C
NEW QUESTION # 132
Which of the following is a client-side action in the Visual Policy Editor that prevents external access and deletes any files created during a secure access session?
- A. Protected Workspace
- B. Virtual Keyboard
- C. Windows Group Policy
- D. Browser Cache and Session Control
- E. Resource Assign
Answer: A
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 133
Which statement is true concerning the default communication between a redundant pair of BIG-IP devices.
- A. Regardless of the configuration, some data is communicated between the systems at regular intervals.
- B. Connection mirroring data is shared through the serial fail-over cable unless network failover is enabled.
- C. Communication between the systems cannot be effected by port lockdown settings.
- D. Data for both connection and persistence mirroring are shared through the same TCP connection.
Answer: D
NEW QUESTION # 134
Since F5 built GTM on the TMOS platform it can exist on the same BIGIP device as LTM:
- A. True
- B. False
Answer: A
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 135
Which of the following are properties of an ASM logging profile? (Choose 2)
- A. web application
- B. storage type
- C. storage filter
- D. storage policy
Answer: B,C
NEW QUESTION # 136
The F5 Visual Policy Editor (VPE) is unique to the F5 BIG-IP APM module; no other access management tool has this capability. Select the features that the VPE provides. Select two.
- A. Checks operating system patch levels
- B. Provides vulnerability scanning
- C. Customizes landing or login page
- D. Assigns a lease pool address
- E. Determines antivirus patch levels
Answer: A,E
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 137
Where is the load balancing mode specified?
- A. within the node definition
- B. within the pool member definition
- C. within the virtual server definition
- D. within the pool definition
Answer: D
Explanation:
Explanation
NEW QUESTION # 138
TMOS is an F5 software module that runs on the BIG-IP platform.
- A. False
- B. True
Answer: A
NEW QUESTION # 139
A BIG IP Administrator reviews the Virtual Server configuration and sees the object status represented by a blue square tor an unknown status. How should the administrator change the unknown status?
- A. restart the BIG-IP device
- B. restart the backend webserver
- C. run a packet capture on the BIG-IP device
- D. assign a monitor to the pool
Answer: D
NEW QUESTION # 140
Which security mode. functions by defining what traffic is allowed and rejecting all other traffic?
- A. context-based access control mode!
- B. negative security model
- C. role-based access control mode!
- D. positive security model
Answer: D
NEW QUESTION # 141
As a part of the Setup Utility, the administrator sets the host name for the BIG-IP. What would be the result if the two systems in a redundant pair were set to the same host name.
- A. The first time the systems are synchronized the receiving system will be assigned the same self-IP addresses as the source system.
- B. When the administrator attempts to access the configuration utility using the host name, they will always connect to the active system.
- C. Host names do not matter in redundant pair communication.
- D. In a redundant pair, the two systems will always have the same host name. The parameter is synchronized between the systems.
Answer: A
NEW QUESTION # 142
The Protected Workspace client-side action provides more client-side security than the
Cacheand Session Control action.
- A. True
- B. False
Answer: A
NEW QUESTION # 143
Monitors can be assigned to which three resources? (Choose three.)
- A. Wide IPs
- B. Pools
- C. Data Centers
- D. Pool Members
- E. Servers
Answer: B,D,E
NEW QUESTION # 144
Given the configuration shown below, if a connection request arrived on the BIG-IP with a source address of 200.10.10.10:1050 and a
destination of 150.10.10.75:80, what would the source IP address of the associated packet be when it arrived on the choosen member of the web_pool self
150.10.10.1 { netmask 255.255.255.0 unit I floating enable vlan external allow tcp https } self
10.10.1.1 { netmask 255.255.255.0 unit I floating enable vlan internal allow default } pool web_pool { member
10.10.1.11:80 member
10.10.1.12:80 member
10.10.1.13:80 }snatpool client_pool { member
10.10.1.100 member
150.10.10.15 }virtual VS_web { destination 150.10.10.10:80 ip protocol tcp snat automap pool web_pool }virtual VS_network{ destination 150.10.1 0.0:any mask
255.255.255.0 snatpool client_pool ip protocol tcp pool web_pool } virtual VS_network { destination 150.10.1 0.0:any mask 255.255.255.0 snatpool client_pool ip protocol tcp pool web_pool } virtual VS_network { destination
150.10.10.0:any mask
255.255.255.0 snatpool client_pool ip protocol tcp pool web_pool }
- A. 10.10.1.I00B.10.10.1.100
- B. 150.10.10.15C.150.10.10.15
- C. 10.10.1.I10.10.1.1
- D. 200.10.10.I0D.200.10.10.10
Answer: A
NEW QUESTION # 145
......
Latest Questions 101 Guide to Prepare Free Practice Tests: https://www.vceprep.com/101-latest-vce-prep.html
101 Practice Exam - 240 Unique Questions: https://drive.google.com/open?id=1ddjO8_tFXF5FCX3EK4-XqFSBNrdPibyn