Get New 2024 Valid Practice To your JN0-451 Exam (Updated 82 Questions)
JNCIS-MistAI JN0-451 Exam Practice Test Questions Dumps Bundle!
The JN0-451 exam covers a wide range of topics related to Mist AI, including the Mist AI architecture, wireless network design, deployment and management of Mist AI, and troubleshooting Mist AI-enabled networks. JN0-451 exam also covers topics such as network automation, network security, and network monitoring.
NEW QUESTION # 37
What is the AP's role in the IEEE 802.1X authentication process?
- A. It acts as a RADIUS proxy server.
- B. It acts as an authenticator.
- C. It acts as an authentication server.
- D. It acts as a supplicant.
Answer: B
Explanation:
Explanation
In the IEEE 802.1X authentication process, the AP acts as an authenticator.
NEW QUESTION # 38
What are two ways to access Marvis? (Choose two.)
- A. Use the conversational assistant.
- B. Use Actions.
- C. Use config templates.
- D. Use Insights.
Answer: A,B
Explanation:
According to the Cisco Catalyst 9800 Series Wireless Controller Software Configuration Guide1, there are two ways to access Marvis, which is a virtual network assistant that provides insights and troubleshooting for wireless networks:
Use the conversational assistant, which allows you to ask natural language questions and get answers from Marvis.
Use Actions, which are predefined queries that you can select from a list and get results from Marvis.
NEW QUESTION # 39
In which two layers of the OSI model are WLANs located? (Choose two.)
- A. Physical
- B. Data Link
- C. Network
- D. Transport
Answer: A,B
Explanation:
Reference:
According to the Lecture 3 - Radio Frequency and Antenna Fundamentals - Part 2 document2, two layers of the OSI model where WLANs are located are:
Physical, which defines how data is encoded and transmitted over the wireless medium using radio waves.
Data Link, which defines how devices access and share the wireless medium using media access control (MAC) protocols.
NEW QUESTION # 40
What does Mist's patented 16-element vBLE Antenna Array do when "engagement" is enabled?
- A. locates Wi-Fi assets
- B. performs radio resource management
- C. transmits unique and directional BLE beams
- D. performs personal pre-shared key sharing
Answer: C
NEW QUESTION # 41
Your customer added an Apple TV in their conference room so that employees can easily share their screen. However, the Apple TV cannot be discovered by the employees' devices.
Which two settings are causing the problem? (Choose two.)
- A. ARP
- B. MDNS
- C. Broadcast/Multicast
- D. Ignore Broadcast SSID Probe Requests
Answer: A,B
NEW QUESTION # 42
What information would be streamed through webhooks? (Choose two.)
- A. SLE metrics of clients
- B. alerts
- C. audit logs
- D. location coordinates of RFID tags
Answer: B,D
NEW QUESTION # 43
Which two Mist Aps would be used for BLE location? (Choose two.)
- A. AP43
- B. AP12
- C. AP32
- D. AP33
Answer: A,D
Explanation:
Explanation
P33 and AP43 are Mist APs that can be used for BLE location.
NEW QUESTION # 44
Which two terms correctly describe transmissions over Wi-Fi? (Choose two.)
- A. shared medium
- B. point-to-point medium
- C. half-duplex
- D. full-duplex
Answer: A,C
Explanation:
Explanation
Transmissions over Wi-Fi are shared medium and half-duplex.
NEW QUESTION # 45
Referring to the exhibit, what is the site ID?
- A. 02e208b2d34
- B. 978c48e6-6ef6-11e6-8bbf-02e208b2d34f
- C. 02e208b2d34f
- D. 9777c1a0-6ef6-11e6-8bbf-02e208b2d34
Answer: B
Explanation:
Reference:
According to the exhibit, the site ID is 978c48e6-6ef6-11e6-8bbf-02e208b2d34f. This can be seen from the URL of the site dashboard, which contains the site ID as a parameter.
NEW QUESTION # 46
Click the Exhibit button.
Referring to the exhibit, in the USA, which two statements are correct? (Choose two.)
- A. The WLAN with SSID NETGEAR24 is configured to industry best practices.
- B. The WLAN with SSID Eero1234 is configured to industry best practices.
- C. The WLAN with SSID NETGEAR24 is not configured to industry best practices.
- D. The WLAN with SSID Eero1234 is not configured to industry best practices.
Answer: C,D
NEW QUESTION # 47
A retail customer has legacy 2.4 GHz scanners that need to connect to the WLAN, but they are not connecting.
Which WLAN data rate setting is required for these devices to connect?
- A. Compatible
- B. Custom Rates
- C. High Density
- D. No Legacy
Answer: A
Explanation:
Explanation
The Compatible WLAN data rate setting is required for legacy 2.4 GHz scanners to connect to the WLAN.
NEW QUESTION # 48
Click the Exhibit button.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. The organization has two available licenses for Marvis wireless.
- B. The organization has one available license for Marvis wireless.
- C. The organization is using one license for Marvis wireless.
- D. The organization is using two licenses for Marvis wireless.
Answer: B,C
Explanation:
According to the exhibit, the organization has a total of two licenses for Marvis wireless, and one of them is in use. Therefore, the organization has one available license and one used license for Marvis wireless.
NEW QUESTION # 49
Click the Exhibit button.
Referring to the exhibit, which statement is correct about the Post-Install user's role?
- A. It has access limited to installing APs and switches at all sites.
- B. It has read-only access to all sites.
- C. It is used for help desk monitoring and workflow for all sites.
- D. It has full access to all sites.
Answer: A
Explanation:
the Post-Install user role is also known as Installer role, which has a minimum level of access to the org, sites, and APs. It can do the initial installation such as claim AP to Org, assign/unassign AP, or place on map, etc., but cannot unclaim or remove the AP from the Org. Site and AP access is allowed based on timed grace period and/or explicit site access.
https://www.mist.com/documentation/mist-ai-mobile-app/
NEW QUESTION # 50
You are deploying multiple Mist APs across many sites in your network. You must ensure that you can group similar devices together to easily apply consistent WxLAN policies across multiple sites.
Which configuration object should be used to accomplish this behavior?
- A. organization labels
- B. radio management
- C. device profile
- D. RF template
Answer: C
Explanation:
Explanation
When deploying multiple Mist APs across many sites in your network and grouping similar devices together to easily apply consistent WxLAN policies across multiple sites, you should use device profiles.
NEW QUESTION # 51
Which two statements are correct about Juniper Mist Dynamic Packet Capture? (Choose two.)
- A. It is automatically attached to the Affected Items list in the Successful Connects SLE.
- B. No configuration is necessary for Mist's Dynamic Packet Capture.
- C. It is automatically attached to a client event displayed on the Insights page.
- D. It must be globally configured at the organization level.
Answer: B,C
Explanation:
Two correct statements about Juniper Mist Dynamic Packet Capture are that no configuration is necessary for Mist's Dynamic Packet Capture and it is automatically attached to a client event displayed on the Insights page. So the correct answers are A. No configuration is necessary for Mist's Dynamic Packet Capture and B. It is automatically attached to a client event displayed on the Insights page.
NEW QUESTION # 52
A customer is replacing their previous WLAN controller with a Mist Edge to maintain centralization of user traffic.
How does Mist Edge affect control plane forwarding and data plane forwarding in this scenario?
- A. Control plane forwarding applies to the Mist Edge and data plane forwarding applies to the Mist Cloud.
- B. Control plane forwarding applies to the Mist Edge and data plane forwarding applies to the Mist Edge.
- C. Control plane forwarding applies to the Mist Cloud and data plane forwarding applies to the Mist Edge.
- D. Control plane forwarding applies to the Mist Cloud and data plane forwarding applies to the Mist Cloud.
Answer: A
NEW QUESTION # 53
You are deploying multiple Mist APs across many sites in your network. You must ensure that you can group similar devices together to easily apply consistent WxLAN policies across multiple sites.
Which configuration object should be used to accomplish this behavior?
- A. organization labels
- B. radio management
- C. device profile
- D. RF template
Answer: C
Explanation:
When deploying multiple Mist APs across many sites in your network and grouping similar devices together to easily apply consistent WxLAN policies across multiple sites, you should use device profiles.
NEW QUESTION # 54
Which two statements correctly describe an extended service set (ESS)? (Choose two.)
- A. The SSID is unique across all BSSs within the ESS.
- B. Each BSS within the ESS has its own unique BSSID.
- C. Each BSS within the ESS share a common BSSID.
- D. The SSID is common across all BSSs within the ESS.
Answer: B,D
Explanation:
According to the Lecture 3 - Radio Frequency and Antenna Fundamentals - Part 2 document2, an extended service set (ESS) is a group of basic service sets (BSSs) that share a common SSID and are connected by a distribution system (DS). Each BSS within the ESS has its own unique BSSID, which is the MAC address of the AP.
NEW QUESTION # 55
......
Juniper JN0-451 (Mist AI - Specialist (JNCIS-MistAI)) Certification Exam is a rigorous test that requires candidates to have a deep understanding of Mist AI solutions and how they can be used to improve network performance. JN0-451 exam covers a wide range of topics, including Mist AI deployment and management, network automation, and troubleshooting. Candidates must demonstrate their expertise in these areas to pass the exam and earn the certification.
Fully Updated Dumps PDF - Latest JN0-451 Exam Questions and Answers: https://www.vceprep.com/JN0-451-latest-vce-prep.html
Updated JN0-451 PDF for the JN0-451 Tests Free Updated Today: https://drive.google.com/open?id=1Tq2nO5EtaUf7AUSTap-Gj1jfNzfLS7sT