Get Prepared for Your HPE0-S60 Exam With Actual 81 Questions
Valid HPE0-S60 Test Answers Full-length Practice Certification Exams
IT professionals who pass the HP HPE0-S60 exam can validate their knowledge and skills in HPE compute solutions and demonstrate their ability to deploy, manage, and troubleshoot HPE compute solutions. Additionally, passing HPE0-S60 exam can help IT professionals enhance their career prospects and gain recognition in the IT industry. HPE0-S60 exam is an essential requirement for professionals who want to earn the HPE ATP - Hybrid IT Solutions V1 certification or the HPE ASE - Server Solutions Architect V4 certification.
NEW QUESTION # 17
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. For the given downlink speed, the maximum number of frames is reached
- B. To use interconnect bay set 3, all compute nodes must be half-height
- C. The master modules are located in the interconnect bays 2 and 5
- D. Both master modules are located in the same HPE S ynergy frame
Answer: D
NEW QUESTION # 18
Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that compute nodes cannot access the storage module. What should you verify first when troubleshooting this problem?
- A. If the D3940 storage module is property licensed through HPE OneView interface.
- B. If there is at least one ISCSI network configured that will provide access to the module.
- C. If there Is a logical interconnect created based on the 12Gb SAS switches.
- D. If the D3940 module is imported in managed state that allows volume provisioning.
Answer: C
Explanation:
When compute nodes cannot access the D3940 Storage Module in an HPE Synergy environment, the first thing to check is whether a logical interconnect has been created based on the 12Gb SAS switches. Logical interconnects are essential for defining the connection and communication pathways between the compute nodes and the storage module. Without a proper logical interconnect configuration, the compute nodes will not be able to access the storage module.
NEW QUESTION # 19
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.
Answer:
Explanation:
Explanation:
To configure HPE OneView for VMware vCenter Server to deploy ESXi systems, follow these steps in the correct order:
* Add HPE OneView credentials to the vCenter Server and create OS Deployment Plan.
* Add vCenter Server to HPE OneView for VMware vCenter Server.
* Upload HPE-friendly ESXi image.
* Deploy new ESXi systems using vCenter Server interface.
* Add HPE OneView credentials to the vCenter Server and create OS Deployment Plan:Integrate HPE OneView with vCenter Server by adding the necessary credentials and setting up the OS Deployment Plan.
* Add vCenter Server to HPE OneView for VMware vCenter Server:Ensure that vCenter Server is added to HPE OneView for VMware vCenter Server to enable communication and management.
* Upload HPE-friendly ESXi image:Upload an ESXi image that is optimized for HPE hardware to the vCenter Server for use in the deployment process.
* Deploy new ESXi systems using vCenter Server interface:Use the vCenter Server interface to deploy new ESXi systems based on the created server profile template and the uploaded ESXi image.
These steps ensure a seamless deployment and management of ESXi systems using HPE OneView integrated with VMware vCenter Server.
NEW QUESTION # 20
Your customer has me following HPE Synergy setup
- Three frames fully populated with HPE Synergy 480 Gen10 Plus modules and 25Gb/s downlink speed formulating a single logical enclosure
- Two HPE Virtual Connect SE 100Gb F32 Module for Synergy
- Four HPE Synergy 50Gb interconnect Link Module
- Six HPE Synergy Virtual Connect SE 32Gb FC Modules
The customer needs to add a frame.
Which statement about the expansion of this setup is true?
- A. The customer can grow the existing logical enclosure up to 5 frames
- B. The additional frame must have HPE Virtual Connect FC modules installed
- C. The additional frame cannot have 12Gb SAS connection modules installed
- D. The customer has to create a new logical enclosure for the additional frame
Answer: A
Explanation:
HPE Synergy allows scaling of logical enclosures up to 5 frames. Given the current setup of three frames fully populated with HPE Synergy 480 Gen10 Plus modules and other specified components, the customer can add another frame to the existing logical enclosure. This flexibility in scaling ensures that the logical enclosure can be expanded without the need to create a new logical enclosure, provided that the necessary interconnect modules are in place.
NEW QUESTION # 21
Your customer wants to compare HPE Superdome Flex with HPE Superdome Flex 280.
Which statement about these two systems is true?
- A. Only HPE Superdome Flex supports 32 sockets and 48TB of memory
- B. Only HPE Superdome Rex 280 can be managed using HPE OneView
- C. Only HPE Superdome Flex supports HPE Persistent Memory
- D. Only HPE Superdome Flex 280 can support multiple nPars
Answer: A
Explanation:
The HPE Superdome Flex system supports configurations of up to 32 sockets and 48TB of memory, making it suitable for extremely large-scale and demanding workloads. In contrast, the HPE Superdome Flex 280 has a lower maximum configuration limit, making it more suited for smaller-scale deployments compared to the full Superdome Flex.
NEW QUESTION # 22
Which statement about an HPE Oneview support dump is true?
- A. Appliance support dump by default contains a logical enclosure support dump
- B. Preview support dump is available only when creating an appliance support dump
- C. Support dump is a binary file that can be opened only in a dedicated application
- D. Support dump can be created if HPE Virtual Connect modules are installed in the frame
Answer: C
NEW QUESTION # 23
Your customer reports mat an external FC boot volume for Windows server is visible four times in the Disk Management 1 online and 3 offline.
What should you do to resolve this issue?
- A. Remove the offline disks using array management tools
- B. Disable deduplication for this volume at the array level
- C. Remove the offline disks using Windows Disk Management
- D. Install and configure MPIO on me Windows system
Answer: D
Explanation:
The issue of seeing multiple instances of an FC boot volume in Disk Management, with one online and three offline, is typically caused by the lack of Multi-Path I/O (MPIO) configuration. Installing and configuring MPIO on the Windows system will enable the operating system to recognize multiple paths to the same storage volume and manage them correctly, presenting only one online instance of the volume.
NEW QUESTION # 24
Which statement about HPE Apollo 2000 Gen10 Plus platform is true?
- A. It is fully managed using HPE OneView including all connections
- B. It is equipped with HPE Persistent memory by default
- C. It can support a single processor only and up to 4 per chassis
- D. It offers servers with AMD EPYC and Intel Xeon Scalable CPUs
Answer: C
NEW QUESTION # 25
An administrator tries to open iLO interlace from HPE OneView Instead of being automatically logged in a login prompt displays Where should you start the troubleshooting process?
- A. At the iLO interface to verify whether the SSO certificate is removed from an iLO.
- B. At the iLO interface to verify whether the ILO Advanced license is properly applied
- C. At HPE OneView Interface to verify whether the iLO processor is disabled
- D. At HPE OneView Interface to verify whether the server is In the maintenance mode
Answer: A
Explanation:
When the iLO interface prompts for a login instead of automatically logging in via HPE OneView, a common issue is that the Single Sign-On (SSO) certificate might have been removed or is not properly configured on the iLO. Verifying the presence and validity of the SSO certificate on the iLO interface is a critical step in troubleshooting this issue.
NEW QUESTION # 26
Your customer plans to deploy ESXi systems to HPE Synergy and HPE ProLiant servers using HPE OneView for VMware vCenter Server.
Which statement about HPE OneView for VMware vCenter Server functionality is true for this environment?
- A. HPE ProLiant servers need an HPE OneView for VMware vCenter Server license for full functionality
- B. HPE Synergy requires HPE Composer 2 for full functionality of HPE OneView for VMware vCenter Server
- C. Individual systems can be added to HPE OneView for VMware vCenter Server through an ILO management processor
- D. Only systems managed using HPE Oneview can use HPE Oneview for VMware vCenter Server functionalities
Answer: D
Explanation:
HPE OneView for VMware vCenter Server provides integrated management and monitoring capabilities for systems managed by HPE OneView. This means that to leverage the full functionality of HPE OneView for VMware vCenter Server, the systems (both HPE Synergy and HPE ProLiant servers) must be managed through HPE OneView. This integration allows for comprehensive infrastructure management directly from the VMware vCenter interface.
NEW QUESTION # 27
Which statement about HPE OneView milestone releases is true?
- A. A milestone release is a release with an enhanced update architecture mat is a prerequisite prior to updating to a subsequent release.
- B. A milestone release is a release that is published when HPE releases new hardware components to immediately support new systems
- C. A milestone release is a release which must be installed on HPE Composer to support current version of the Service Pack for Synergy
- D. A milestone release is available for selected partners that give access to HPE OneView features which are not officially announced.
Answer: C
NEW QUESTION # 28
Your customer plans to add four HPE Synergy frames to an existing management ring Ail installed frames are equipped with two 2-port FLM modules, while new frames will be equipped with 4-port FLM modules.
Which statement about mixing different FLM modules is true?
- A. A management ring with mixed FLM modules cannot have more than 12 frames
- B. Existing 2-port FLM modules must be replaced with 4-port FLM modules
- C. A management ring can contain mixed frame link module configurations
- D. Mixing different FLM modules is allowed if all of them have the same firmware version
Answer: A
NEW QUESTION # 29
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.
Answer:
Explanation:
1 - Add vCenter Server to HPE OneView for VMware vCenter Server.
2 - Add HPE OneView credentials to the vCenter Server and create OS Deployment Plan.
3 - Upload HPE-friendly ESXi image.
4 - Deploy new ESXi systems using vCenter Server interface.
NEW QUESTION # 30
Which statement about the HPE D3940 storage module is true?
- A. SATA drives requires redundant 10 adapters to be installed in this module
- B. Up to five modules can be installed in a single frame with Gen10 servers
- C. it is configured through CLl available from HPE Synergy console
- D. Only one type of drives (SATA, SAS, SSD) can be installed in each module
Answer: C
NEW QUESTION # 31
Your customer experienced some problems caused by outdated HPE Superdome Flex firmware. Which update method should they use to avoid these issues in the future?
- A. HPE SUM if HPE Persistent Memory firmware must be updated
- B. HPE OneView method for I/O firmware update procedure
- C. RMC CLI to update I/O and HPE Persistent Memory firmware
- D. HPE OneView IT HPE Persistent Memory firmware must be updated.
Answer: C
NEW QUESTION # 32
Your customer manages an HPE Synergy platform using HPE OneView 5.6. To leverage new functionalities, the customer wants to update HPE OneView to version 61 Which statement about this update process is true?
- A. The customer can update directly to 6,1, but HPE OneView downtime will be longer.
- B. To update to 6,1, the customer has to first update to 6 0, which is a milestone edition.
- C. Before updating to 6,1, customer should increase memory size on the HPE Composer.
- D. The customer must check the HPE Composer version, as 61 is supported only with HPE Composer2.
Answer: B
Explanation:
When updating HPE OneView to version 6.1, it is necessary to first update to version 6.0, which is a milestone edition. Milestone editions include significant architectural changes and updates that are prerequisites for subsequent versions. This step ensures that the system is properly prepared and compatible with the new features and improvements introduced in version 6.1.
NEW QUESTION # 33
Your customer plans to deploy VMware ESXi 7. 0 U2, and they are looking for a hardware platform that will allow them to use up to 16 CPU sockets Which HPE compute system meets the customer requirements?
- A. HPE ProLiant OL380 Gen 10 Plus
- B. HPE Synergy 480 Gen10 Plus
- C. HPE Superdome Flex system
- D. HPE ProLiant DL580 Gen10
Answer: C
Explanation:
The HPE Superdome Flex system is the only HPE compute system that supports up to 16 CPU sockets, making it suitable for customers who require a hardware platform with such high scalability. The Superdome Flex is designed for mission-critical workloads and provides exceptional scalability and performance.
NEW QUESTION # 34
Which statement about a new HPE SimpliVity deployment is true?
- A. All new HPE SimpliVity models are based on mid CPUs
- B. New HPE SimpliVity deployments gives customer flexible choice of hypervisor
- C. AM new HPE SimpliVity models are software optimized
- D. A new HPE SimpliVity node can be a member of multiple dusters
Answer: B
Explanation:
New HPE SimpliVity deployments offer customers the flexibility to choose between different hypervisors, such as VMware vSphere and Microsoft Hyper-V. This flexibility allows customers to select the hypervisor that best fits their existing infrastructure and operational preferences.
NEW QUESTION # 35
After deploying HPE Superdome Flex 280 you need to check Core Analysis Engine (CAE) Log.
Click the appropriate section in the HPE Superdome Flex 280 management interface that will allow you to complete this task.
Answer:
Explanation:
NEW QUESTION # 36
Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that compute nodes cannot access the storage module. What should you verify first when troubleshooting this problem?
- A. If the D3940 storage module is property licensed through HPE OneView interface.
- B. If the D3940 module is imported in managed state that allows volume provisioning.
- C. If there Is a logical interconnect created based on the 12Gb SAS switches.
- D. If there is at least one ISCSI network configured that will provide access to the module.
Answer: B
NEW QUESTION # 37
......
Preparing for the HPE0-S60 exam requires a combination of hands-on experience with HPE compute solutions and studying the exam materials provided by HPE. HPE offers a variety of resources to help candidates prepare for the exam, including training courses, study guides, and practice exams. It is recommended that candidates take advantage of all available resources to ensure they are fully prepared for the exam.
HP HPE0-S60 exam measures the candidate's ability to design and deploy HPE compute solutions in complex enterprise environments. HPE0-S60 exam covers various topics, including HPE Synergy Solutions, HPE BladeSystem Solutions, HPE ProLiant Solutions, and HPE Apollo Solutions. HPE0-S60 exam also covers HPE OneView and HPE Integrated Lights-Out (iLO) management solutions, which are essential for managing and monitoring HPE compute solutions.
Accurate & Verified 2024 New HPE0-S60 Answers As Experienced in the Actual Test!: https://www.vceprep.com/HPE0-S60-latest-vce-prep.html
HPE0-S60 Certification Sample Questions certification Exam: https://drive.google.com/open?id=12Gx5XcUwZxLtHr27SOduVNIxRHc6Regj