[Nov-2021] Latest NSE5_FAZ-6.2 Exam Dumps for Pass Guaranteed
Reliable Network Security Analyst NSE5_FAZ-6.2 Dumps PDF Nov 03, 2021 Recently Updated Questions
Difficulty in Writing Fortinet NSE 5 - FortiAnalyzer (NSE5 FAZ-6.2) Exam
The difficulty of any exam is a relative phenomenon. Also, it is quite tough to answer this without knowing your academic background and whether you have any prior exposure to financial markets. If you have prior exposure in the field of financial markets and follow the markets regularly, I think you will do just fine. However, if you are completely new to this field, you may have a hard time understanding a few concepts, but it is still manageable. Just remember the following key points and you will be good to go
You will be tested extensively only on the topics in the curriculum provided by NSE. It is more of a knowledge-based test rather than an application-based test. Make sure you do not miss any topic from the curriculum. There are no negative marks for incorrect answers in foundation modules. There are negative marks for incorrect answers in intermediate and advanced modules. Every exam can become a difficult one if not well prepared. Lots of study material for this exam is available online, at the official website, and in the form of NSE5 FAZ-6.2 practice dumps. VCEPrep provide the best quality dumps that are updated very often to keep them up to the mark. If students practice these dumps and take the NSE5 FAZ-6.2 practice tests, they can surely overcome the exam difficulty and clear the exam with good grades. Below is a list of topics that students usually find difficult and challenging. Make sure you cover them in detail.
Topics of Fortinet NSE 5 - FortiAnalyzer (NSE5 FAZ-6.2) Exam
Following are the objectives and agenda for this certification exam. A detailed practice for these contents could be done via the NSE5 FAZ-6.2 practice exams as they are made on the same contents and offer the same environment for students to experience as the real exam does:
Agenda 1. Introduction and Initial Configuration Agenda 2. Administration and Management Agenda 3. Device Registration and Communication Agenda 4. Logging Agenda 5. Reports
Objective 1. Describe key features and concepts of FortiAnalyzer Objective 2. Deploy an appropriate architecture Objective 3. Use administrative access controls Objective 4. Monitor administrative events and tasks Objective 5. Understand FortiAnalyzer Objective 6. Configure high availability Objective 7. Understand HA synchronization and load balancing Objective 8. Upgrade an HA clusterâs firmware Objective 9. Verify the normal operation of an HA cluster Objective 10. Manage ADOMs Objective 11. Configure RAID Objective 12. Register supported devices Objective 13. Troubleshoot communication issues Objective 14. Manage disk quota Objective 15. Manage registered devices Objective 16. Protect log information Objective 17. View and search logs Objective 18. Troubleshoot and manage logs Objective 19. Monitor events Objective 20. Generate and customize reports Objective 21. Customize charts and datasets Objective 22. Manage reports Objective 23. Troubleshoot reports
Average Salary of Fortinet NSE 5 - FortiAnalyzer (NSE5 FAZ-6.2) Exam Certified Professional
It is important to understand the kind of salary you can expect from this kind of career path while looking for advancement and progress in the world of field engineers and Fortinet NSE certification. Salaries at Fortinet are expected to range from $65,000 to about $105,000, and the average salary is about $85,000 for a certified NSE engineer.
Of course, by ensuring that you do more to help you earn, and increasing your skills and qualifications, you can focus on trying to develop this. You can also go to the Field Engineer and see if they can help you increase your prospective earnings and obtain better positions.
NEW QUESTION 28
What is the purpose of a dataset query in FortiAnalyzer?
- A. It sorts log data into tables
- B. It injects log data into the database
- C. It extracts the database schema
- D. It retrieves log data from the database
Answer: D
NEW QUESTION 29
What are two advantages of setting up fabric ADOM? (Choose two.)
- A. It can include only FortiGate devices that are part of the same Security Fabric
- B. It can be used to facilitate communication between devices in same Security Fabric
- C. It can include all Fortinet devices that are part of the same Security Fabric
- D. It can be used for fast data processing and log correlation
Answer: A,D
NEW QUESTION 30
Which two of the following must you configure on FortiAnalyzer to email a FortiAnalyzer report externally?
(Choose two.)
- A. Output profile
- B. SFTP server
- C. Report scheduling
- D. Mail server
Answer: A,B
Explanation:
Explanation/Reference: https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/6d9f8fb5-6cf4-11e9-
81a4-00505692583a/FortiAnalyzer-6.0.5-Administration-Guide.pdf (119)
NEW QUESTION 31
Which two constraints can impact the amount of reserved disk space required by FortiAnalyzer? (Choose two.)
- A. RAID level
- B. Total quota
- C. License type
- D. Disk size
Answer: A,B
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/368682/disk-space-allocation
NEW QUESTION 32
For which two SAML roles can the FortiAnalyzer be configured? (Choose two.)
- A. Identity collector
- B. Identity provider
- C. Service provider
- D. Principal
Answer: B,C
NEW QUESTION 33
View the exhibit:
What does the 1000MB maximum for disk utilization refer to?
- A. The disk quota for all devices in the ADOM
- B. The disk quota for the ADOM type
- C. The disk quota for the FortiAnalyzer model
- D. The disk quota for each device in the ADOM
Answer: A
NEW QUESTION 34
What remote authentication servers can you configure to validate your FortiAnalyzer administrator logons? (Choose three)
- A. Local
- B. PKI
- C. LDAP
- D. TACACS+
- E. RADIUS
Answer: C,D,E
NEW QUESTION 35
View the Exhibit:
Why is the total quota less than the total system storage?
- A. The oftpd process has not archived the logs yet
- B. Some space is reserved for system use, such as storage of compression files, upload files, and temporary report files
- C. 3.6% of the system storage is already being used.
- D. The logfiled process is just estimating the total quota
Answer: B
NEW QUESTION 36
Which two purposes does the auto cache setting on reports serve? (Choose two.)
- A. It provides diagnostics on report generation time.
- B. It reduces report generation time.
- C. It automatically updates the hcache when new logs arrive.
- D. It reduces the log insert lag rate.
Answer: B,C
Explanation:
Reference:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/384416/how-auto-cache-works
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/86926/enabling-auto-cache
NEW QUESTION 37
Logs are being deleted from one of the ADOMs earlier than the configured setting for archiving in the data policy.
What is the most likely problem?
- A. CPU resources are too high
- B. Logs in that ADOM are being forwarded, in real-time, to another FortiAnalyzer device
- C. The ADOM disk quota is set too low, based on log rates
- D. The total disk space is insufficient and you need to add other disk
Answer: C
Explanation:
Reference:
20logs.htm
NEW QUESTION 38
For which two purposes would you use the command set log checksum? (Choose two.)
- A. To prevent log modification or tampering
- B. To encrypt log communications
- C. To send an identical set of logs to a second logging server
- D. To help protect against man-in-the-middle attacks during log upload from FortiAnalyzer to an SFTP server
Answer: A,D
Explanation:
To prevent the log in the store from being modified, you can add a log checksum by using the config system global command. When the log is split, archived, and the log is uploaded (if the feature is enabled), you can configure the FortiAnalyzer to log the log file hash value, timestamp, and authentication code. This can help defend against man-in-the-middle attacks when uploading log transmission data from the FortiAnalyzer to the SFTP server.
NEW QUESTION 39
How do you restrict an administrator's access to a subset of your organization's ADOMs?
- A. Assign the ADOMs to the administrator's account
- B. Assign the default Super_User
- C. Configure trusted hosts
- D. Set the ADOM mode to Advanced
Answer: A
NEW QUESTION 40
After you have moved a registered logging device out of one ADOM and into a new ADOM, what is the purpose of running the following CLI command?
execute sql-local rebuild-adom <new-ADOM-name>
- A. To reset the disk quota enforcement to default
- B. To migrate the archive logs to the new ADOM
- C. To populate the new ADOM with analytical logs for the moved device, so you can run reports
- D. To remove the analytics logs of the device from the old database
Answer: D
Explanation:
Explanation/Reference: https://docs.fortinet.com/document/fortianalyzer/6.0.2/cli-reference/551596/sql-local
NEW QUESTION 41
What is the purpose of the following CLI command?
- A. To add a unique tag to each log to prove that it came from this FortiAnalyzer
- B. To add a log file checksum
- C. To encrypt log communications
- D. To add the MD's hash value and authentication code
Answer: B
NEW QUESTION 42
What are two of the key features of FortiAnalyzer? (Choose two.)
- A. Virtual domains (VDOMs)
- B. Centralized log repository
- C. Cloud-based management
- D. Reports
Answer: B,D
NEW QUESTION 43
Which statements are true regarding securing communications between FortiAnalyzer and FortiGate with SSL? (Choose two.)
- A. SSL is the default setting.
- B. SSL encryption levels are globally set on FortiAnalyzer.
- C. FortiAnalyzer encryption level must be equal to, or higher than, FortiGate.
- D. SSL communications are auto-negotiated between the two devices.
- E. SSL can send logs in real-time only.
Answer: A,B
NEW QUESTION 44
What are two advantages of setting up fabric ADOM? (Choose two.)
- A. It can include only FortiGate devices that are part of the same Security Fabric
- B. It can include all Fortinet devices that are part of the same Security Fabric
- C. It can be used to facilitate communication between devices in same Security Fabric
- D. It can be used for fast data processing and log correlation
Answer: B,D
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/448471/creating-a-security-fabric-adom
NEW QUESTION 45
When you perform a system backup, what does the backup configuration contain? (Choose two.)
- A. System information
- B. Authorized devices logs
- C. Generated reports
- D. Device list
Answer: A,D
NEW QUESTION 46
......
Latest 2021 Realistic Verified NSE5_FAZ-6.2 Dumps: https://www.vceprep.com/NSE5_FAZ-6.2-latest-vce-prep.html